Black & Decker LLP120B manual Additional safety instructions for AlligatorTM Lopper, Power Supply

Page 4

and pinch or fall into chain.

• Power Supply

Connect chain saw battery charger to correct voltage, that is, be sure that the voltage supplied is the same as that specified on the nameplate of the tool.

Additional safety instructions for the

AlligatorTM Lopper

WARNING: Never use the tool above shoulder height. Always position yourself out of the path of falling branches and debris.

WARNING: Do not use this tool to fell trees.

- Pre-plan a safe exit from falling branches and debris. Ensure the exit route is clear of obstacles that would prevent or hinder movement. Remember wet grass and freshly cut bark is slippery. - Be aware of the direction that a branch may fall. Consider all conditions that may affect the direction of fall, including:

- The intended direction of fall. - The natural lean of the branch.

- Any unusual heavy limb structure or decay.

- Surrounding trees and obstacles including overhead lines. - The wind speed and direction.

- The safe distance between a branch and debris to be felled and bystanders, buildings and other objects is at least 2 1/2 times the length of the branch. Any bystander, building or object within this distance is at risk from being struck by the falling branch.

- When cutting a limb that is under tension be aware of spring back. When the tension in the wood fibres are released the spring loaded limb may strike the operator and/or throw the tool out of control.

- Always wear suitable safety equipment such as non-skid heavy-duty shoes, goggles, ear protection and gloves when operating the tool.

- Ensure someone is nearby (at a safe distance) in case of an accident.

-Do not attempt to operate the tool when in a tree, on a ladder or standing on any other unstable support.

-Keep proper footing and balance at all times.

-Hold the tool firmly with both hands when the motor is running.

-Keep handles dry, clean and free from oil and grease. Greasy oily handles are slippery causing loss of control.

-Do not let the moving chain contact any object at the tip of the guide bar.

-Keep your saw chain properly tensioned. Check tension at regular intervals with the motor stopped and battery disconnected.

-Begin and continue cutting only with the chain moving at full speed.

-Watch for shifting branches or other forces that could close a cut and pinch or fall into the chain.

-Use extreme caution when re-entering a previous cut. Engage spikes on lower jaw into wood and allow the chain to reach full speed before proceeding with cut.

-Use of this tool for operation different to those intended could result in hazardous situations. Cut wood only. Don’t use this tool for purposes not intended - for example - Don’t use tool for cutting plastic, masonry or non-wood building materials.

-If any debris gets caught with the guard or tool discontinue use, disconnect power cord and clear debris.

-Worn chains and chain guide bars should be replaced.

-Only use replacement bars and chains specified by the manufacturer.

-This saw is intended for infrequent use by homeowners, cottagers, and campers, and for such general applications as clearing, pruning, cutting firewood, etc. It is not intended for prolonged use. Prolonged periods of operation can cause circulatory problems

in the user’s hands due to vibration. For such use, it may be appropriate to use a saw having an anti-vibration feature.

Kickback Safety Features

Guard against kickback. Kickback is the upward motion of the guide bar that occurs when the saw chain, at the nose of the guide bar, contacts an

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 20v max* lithium alligator lopper Safety Instructions and Warnings for Chain Saws Important Safety InstructionsIntended use Disconnect Battery Maintain Chain Saw With CareStay Alert Check Damaged Parts Guard Against KickbackKickback Safety Features Additional safety instructions for AlligatorTM LopperPower Supply Electrical safety SymbolsDust, which may cause serious and permanent respiratory or Important safety instructions for Battery chargers Chain SAW Names and TermsComponents Ampere RatingImportant safety warnings For battery packs Storage RecommendationsLeaving the battery in the charger Charging ProcedureImportant Charging Notes Preparing AlLigator Lopper For Use Chain tension adjustmentReplacing the chain and chain bar That the battery is disconnected from the tool Removing the saw chain & chain bar figs. F, GAssembling the chain bar and chain figs. G, H OperationSwitching on fig. K Oiling figTrimming branches Remove branches as shown in Fig LMaintenance Accessories Service InformationReplacement chain catalog number RC600 Rbrc SealProblem Possible Cause TroubleshootingTo shutoff abruptly when the charge is depleted Two -year LImited warranty Manuel D’ Instructions Directives DE Première Importance Utilisation prÉvueScies à chaîne Porter des lunettes de sécurité Transport de la scie à chaîneEntretien soigné de la scie à chaîne Débrancher le bloc-pilesBloc d’alimentation Directives de sÉcuritÉ concernant l’effet de rebond Sécurité en matière d’électricitéSymboles Terminologie ET Nomenclature Relatives À ’ÉBRANCHEURQue ceux qui sont mentionnés dans le présent mode d’emploi Le chargeur fourni avec ce produit est correctement branché’il est orienté en position verticale ou au plancher Ces chargeurs n’ont pas été conçus pour être utilisés àComposantes Intensité aDirectives de sÉcuritÉ importantes pour Les blocs-piles Conserver ces mesuresLire toutes les directives Recommandations en matière de rangement Procédure de chargeChargeur Figure B Remarques importantes pour le chargementInsertion et retrait du bloc-piles de l’outil Réglage de la tension de la chaîneFig. G & H Remplacement de la chaîne et du guide-chaîne Lubrification fig FonctionnemenTEnTretien Mise en marche et arrêt fig. JMise en marche fig. K Taillage des branchesNettoyage LubrificationRangement Le sceau Srprcmc AccessoiresBlack+Decker Information sur les réparations Garantie limitéE de deux ans DEpannage Problème Cause possible Solution possibleMaximiser la durée de vie du Page Podadora Alligator CON Batería DE Litio DE 20 V MÁX Uso previsto Normas generales de seguridadUse lentes de seguridad Transporte de la sierraConserve la sierra de cadena adecuadamente Desconecte la bateríaFuente de energía CaracterÍsticas de seguridad durante el Retroceso Nombres Y Términos DE LAS Sierras DE Cadena SímbolosNo exponga el cargador a la lluvia ni a la nieve Componentes AmperajeLea todas las instrucciones Nunca intente conectar 2 cargadores juntosProcedimiento de carga Notas importantes sobre la cargaAjuste de tensión de la cadena Verificación y ajuste de la tensión de la cadena Figura DRetiro de la cadena y de la barra de la sierra Figuras F y G OperaciÓn Lubricación FiguraEncendido K Recorte de ramasMantenimiento LimpiezaLubricación TransporteAfilado de la cadena de la sierra AlmacenamientoInformación de mantenimiento AccesoriosEl sello Rbrc Garantía limitado de dos años Problema Causa posible Solución posible Maximizar la vida útil delPerfiles y Herramientas de Morelia Gpo. Comercial de Htas. y RefaccionesFerre Pat de Puebla, S.A. de C.V De Occidente, S.A. de C.V Enrique Robles

LLP120B specifications

The Black & Decker LLP120B is a versatile and powerful cordless lithium-ion electric wine opener that has gained popularity among wine enthusiasts for its sleek design and remarkable performance. This innovative tool streamlines the wine-opening process, making it an essential accessory for any home bar or kitchen.

One of the standout features of the LLP120B is its cordless convenience. This electric wine opener allows users to uncork wine bottles effortlessly without the hassle of tangled cords. Powered by a lithium-ion battery, it offers the freedom to open bottles anywhere, whether at home, during a picnic, or at a gathering with friends.

In terms of design, the Black & Decker LLP120B boasts an ergonomic grip that enhances ease of use. Its lightweight and comfortable build allows for a secure hold, making it accessible for users of all ages. With its modern aesthetic and sleek lines, it also adds a touch of elegance to any tabletop setting.

The efficiency of the LLP120B is another key characteristic. It can open up to 30 bottles on a single charge, making it ideal for entertaining guests without the worry of running out of battery power. The quick and reliable operation ensures that users can enjoy their wine without unnecessary delays.

The device is equipped with a durable stainless steel and plastic construction that guarantees longevity. Its spiral and corkscrew mechanism is designed to fit all standard cork sizes, providing versatility for various wine bottles. Additionally, the LLP120B features a built-in foil cutter, allowing users to remove foil caps with ease before uncorking their bottles.

Charging the Black & Decker LLP120B is a breeze, thanks to its convenient charging base that allows the opener to be stored tidily when not in use. This aspect not only maintains the device but ensures that it is always ready for action when needed.

In conclusion, the Black & Decker LLP120B is an exceptional electric wine opener that combines convenience, efficiency, and style. Its cordless design, ergonomic grip, sturdy construction, and ability to handle multiple bottles on a single charge position it as a must-have for wine lovers. Whether hosting a casual gathering or enjoying a quiet evening, this electric wine opener makes the experience smoother and more enjoyable.
Top Page Image Contents