Black & Decker LLP120B manual Maintain Chain Saw With Care, Disconnect Battery, Stay Alert

Page 3

off the switch, the guide bar and saw chain to the rear. Remove battery and secure latch when transporting saw.

• Maintain Chain Saw With Care

Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.

• Disconnect Battery

Disconnect battery from chain saw when not in use, before servicing, when tensioning chain, and when changing accessories and attachments, such as saw chain.

• Stay Alert

Watch what you are doing. Use common sense. Do not operate chain saw when you are tired, ill, or under the influence of alcohol, drugs, or medication. Keep all parts of the body away from the saw chain when the motor is operating. Before you start the saw, make sure the saw chain is not contacting anything. When cutting through wood, remember the chain saw cuts quickly and will continue its downward or upward path. Stay out of its path.

• Check Damaged Parts

Before further use of the chain saw, any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Do not use chain saw if switch does not turn it on and off. Do not operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released.

• Guard Against Kickback

WARNING: KICKBACK may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of

the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious injury to user.

The following precautions should be followed to minimize kickback:

(1.) Grip Saw Firmly. Hold the chain saw firmly with both hands when the motor is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. Chain saw will pull forward when cutting on the bottom edge of the bar, and push backward when cutting along the top edge of the bar.

(2.) Do not over reach.

(3.) Keep proper footing and balance at all times.

(4.) Don’t let the nose of the guide bar contact a log, branch, ground or other obstruction.

(5.) Don’t cut above shoulder height.

(6.) Use devices such as low kickback chain and reduced kickback guide bars that reduce the risks associated with kickback.

(7.) Only use replacement bars and chains specified by the manufacturer or the equivalent.

(8.) Never let the moving chain contact any object at the tip of the guide bar.

(9.) Keep the working area free from obstructions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could hit while you are cutting through a particular log or branch.

(10.) Keep your saw chain sharp and properly tensioned. A loose or dull chain can increase the chance of kickback. Check tension at regular intervals with the motor stopped and battery removed, never with the motor running.

(11.) Begin and continue cutting only with the chain moving at full speed. If the chain is moving at a slower speed, there is a greater chance for kickback to occur.

(12.) Cut one log at a time.

(13.) Use extreme caution when re-entering a previous cut. Engage ribbed bumpers into wood and allow chain to reach full speed before proceeding with cut.

(14.) Do not attempt plunge cuts or bore cuts.

(15.) Watch for shifting logs or other forces that could close a cut

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 20v max* lithium alligator lopper Important Safety Instructions Safety Instructions and Warnings for Chain SawsIntended use Check Damaged Parts Guard Against Kickback Disconnect BatteryMaintain Chain Saw With Care Stay AlertAdditional safety instructions for AlligatorTM Lopper Kickback Safety FeaturesPower Supply Symbols Electrical safetyDust, which may cause serious and permanent respiratory or Chain SAW Names and Terms Important safety instructions for Battery chargersAmpere Rating ComponentsStorage Recommendations Important safety warnings For battery packsCharging Procedure Leaving the battery in the chargerImportant Charging Notes Chain tension adjustment Preparing AlLigator Lopper For UseReplacing the chain and chain bar Operation That the battery is disconnected from the toolRemoving the saw chain & chain bar figs. F, G Assembling the chain bar and chain figs. G, HRemove branches as shown in Fig L Switching on fig. KOiling fig Trimming branchesMaintenance Rbrc Seal AccessoriesService Information Replacement chain catalog number RC600Troubleshooting Problem Possible CauseTo shutoff abruptly when the charge is depleted Two -year LImited warranty Manuel D’ Instructions Utilisation prÉvue Directives DE Première ImportanceScies à chaîne Débrancher le bloc-piles Porter des lunettes de sécuritéTransport de la scie à chaîne Entretien soigné de la scie à chaîneBloc d’alimentation Sécurité en matière d’électricité Directives de sÉcuritÉ concernant l’effet de rebondTerminologie ET Nomenclature Relatives À ’ÉBRANCHEUR SymbolesCes chargeurs n’ont pas été conçus pour être utilisés à Que ceux qui sont mentionnés dans le présent mode d’emploiLe chargeur fourni avec ce produit est correctement branché ’il est orienté en position verticale ou au plancherIntensité a ComposantesConserver ces mesures Directives de sÉcuritÉ importantes pour Les blocs-pilesLire toutes les directives Remarques importantes pour le chargement Recommandations en matière de rangementProcédure de charge Chargeur Figure BRéglage de la tension de la chaîne Insertion et retrait du bloc-piles de l’outilFig. G & H Remplacement de la chaîne et du guide-chaîne Mise en marche et arrêt fig. J Lubrification figFonctionnemenT EnTretienLubrification Mise en marche fig. KTaillage des branches NettoyageRangement Accessoires Le sceau SrprcmcBlack+Decker Information sur les réparations Garantie limitéE de deux ans Problème Cause possible Solution possible DEpannageMaximiser la durée de vie du Page Podadora Alligator CON Batería DE Litio DE 20 V MÁX Normas generales de seguridad Uso previstoDesconecte la batería Use lentes de seguridadTransporte de la sierra Conserve la sierra de cadena adecuadamenteFuente de energía CaracterÍsticas de seguridad durante el Retroceso Símbolos Nombres Y Términos DE LAS Sierras DE CadenaNo exponga el cargador a la lluvia ni a la nieve Amperaje ComponentesNunca intente conectar 2 cargadores juntos Lea todas las instruccionesNotas importantes sobre la carga Procedimiento de cargaVerificación y ajuste de la tensión de la cadena Figura D Ajuste de tensión de la cadenaRetiro de la cadena y de la barra de la sierra Figuras F y G Lubricación Figura OperaciÓnLimpieza Encendido KRecorte de ramas MantenimientoAlmacenamiento LubricaciónTransporte Afilado de la cadena de la sierraAccesorios Información de mantenimientoEl sello Rbrc Garantía limitado de dos años Maximizar la vida útil del Problema Causa posible Solución posibleEnrique Robles Perfiles y Herramientas de MoreliaGpo. Comercial de Htas. y Refacciones Ferre Pat de Puebla, S.A. de C.V De Occidente, S.A. de C.V

LLP120B specifications

The Black & Decker LLP120B is a versatile and powerful cordless lithium-ion electric wine opener that has gained popularity among wine enthusiasts for its sleek design and remarkable performance. This innovative tool streamlines the wine-opening process, making it an essential accessory for any home bar or kitchen.

One of the standout features of the LLP120B is its cordless convenience. This electric wine opener allows users to uncork wine bottles effortlessly without the hassle of tangled cords. Powered by a lithium-ion battery, it offers the freedom to open bottles anywhere, whether at home, during a picnic, or at a gathering with friends.

In terms of design, the Black & Decker LLP120B boasts an ergonomic grip that enhances ease of use. Its lightweight and comfortable build allows for a secure hold, making it accessible for users of all ages. With its modern aesthetic and sleek lines, it also adds a touch of elegance to any tabletop setting.

The efficiency of the LLP120B is another key characteristic. It can open up to 30 bottles on a single charge, making it ideal for entertaining guests without the worry of running out of battery power. The quick and reliable operation ensures that users can enjoy their wine without unnecessary delays.

The device is equipped with a durable stainless steel and plastic construction that guarantees longevity. Its spiral and corkscrew mechanism is designed to fit all standard cork sizes, providing versatility for various wine bottles. Additionally, the LLP120B features a built-in foil cutter, allowing users to remove foil caps with ease before uncorking their bottles.

Charging the Black & Decker LLP120B is a breeze, thanks to its convenient charging base that allows the opener to be stored tidily when not in use. This aspect not only maintains the device but ensures that it is always ready for action when needed.

In conclusion, the Black & Decker LLP120B is an exceptional electric wine opener that combines convenience, efficiency, and style. Its cordless design, ergonomic grip, sturdy construction, and ability to handle multiple bottles on a single charge position it as a must-have for wine lovers. Whether hosting a casual gathering or enjoying a quiet evening, this electric wine opener makes the experience smoother and more enjoyable.
Top Page Image Contents