Black & Decker LLP120B manual Maintenance

Page 13

MAINTENANCE

Your Black+Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

WARNING: Before performing any maintenance or cleaning of the tool, remove battery from the tool.

Cleaning

- Regularly remove the chain access cover and remove any debris that has become trapped.

- Regularly clean the ventilation slots with a clean, dry paint brush. - To clean the tool, use only mild soap and a damp cloth. Never let any liquid get inside the tool and never immerse any part of the tool into liquid.

Oiling

- Regularly oil the oiling points (16) as indicated in figure I.

Transporting

- Always transport the tool with the jaws closed and the latch in the locked position.

Saw Chain Sharpening

WARNING: Sharp moving chain. To prevent accidental operation, insure that battery is disconnected from the tool before performing the following operations. Failure to do this could result in serious personal injury.

CAUTION: Sharp chain. Always wear protective gloves when handling chain. The chain is sharp and can cut you when it is not running. To get the best possible performance from your chain saw it is important to keep the teeth of the chain sharp. Follow these helpful tips for proper saw chain sharpening:

1. Remove the saw chain and use a chain vise when doing any sharpening. See “Removing the saw chain and chain bar”.

2.For best results use a 4.5mm file and a file holder or filing guide to sharpen your chain. This will ensure you always get the correct sharpening angles.

3. Place the file holder flat on the top plate and depth gauge of the cutter.

4. (Figure M) Keep the

M

correct top plate filing

 

angle line of 30° on your

 

file guide parallel with your

 

chain (file at 60° from chain

 

viewed from above).

N

5. (Figure N) Sharpen cutters

on one side of the chain

 

first. File from the inside of

 

each cutter to the outside.

 

Then turn your saw chain

 

around and repeat the processes (2,3,4) for cutters on the

other side of the chain. Use a flat file to file the tops of the

rakers (portion of chain

O

link in front of the cutter)

so that they are about .025

 

in. below the tips of the

 

cutters.

 

6. (Figure O) Keep all cutter

 

lengths equal.

 

7. If damage is present on the chrome surface of the top plates or side plates, file back until such damage is removed.

CAUTION: After filing, the cutter will be sharp, use extra caution during this process.

NOTE: Each time the chain is sharpened, it loses some of the low kickback qualities and extra caution should be used. It is recommended that a chain be sharpened no more than four times.

Storage

- When the tool will not be used for several months, wipe any metal components with oil.

- Store the tool in a secure and dry location. The storage temperature must always remain in the range of 41°F (+5 °C) to 104°F (+40 °C). Place the product on a level safe location. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed

by authorized service centers or other qualified service organizations, always using identical replacement parts.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 20v max* lithium alligator lopper Safety Instructions and Warnings for Chain Saws Important Safety InstructionsIntended use Maintain Chain Saw With Care Disconnect BatteryStay Alert Check Damaged Parts Guard Against KickbackKickback Safety Features Additional safety instructions for AlligatorTM LopperPower Supply Electrical safety SymbolsDust, which may cause serious and permanent respiratory or Chain SAW Names and Terms Important safety instructions for Battery chargersAmpere Rating ComponentsStorage Recommendations Important safety warnings For battery packsLeaving the battery in the charger Charging ProcedureImportant Charging Notes Preparing AlLigator Lopper For Use Chain tension adjustmentReplacing the chain and chain bar Removing the saw chain & chain bar figs. F, G That the battery is disconnected from the toolAssembling the chain bar and chain figs. G, H OperationOiling fig Switching on fig. KTrimming branches Remove branches as shown in Fig LMaintenance Service Information AccessoriesReplacement chain catalog number RC600 Rbrc SealProblem Possible Cause TroubleshootingTo shutoff abruptly when the charge is depleted Two -year LImited warranty Manuel D’ Instructions Directives DE Première Importance Utilisation prÉvueScies à chaîne Transport de la scie à chaîne Porter des lunettes de sécuritéEntretien soigné de la scie à chaîne Débrancher le bloc-pilesBloc d’alimentation Sécurité en matière d’électricité Directives de sÉcuritÉ concernant l’effet de rebondTerminologie ET Nomenclature Relatives À ’ÉBRANCHEUR SymbolesLe chargeur fourni avec ce produit est correctement branché Que ceux qui sont mentionnés dans le présent mode d’emploi’il est orienté en position verticale ou au plancher Ces chargeurs n’ont pas été conçus pour être utilisés àIntensité a ComposantesDirectives de sÉcuritÉ importantes pour Les blocs-piles Conserver ces mesuresLire toutes les directives Procédure de charge Recommandations en matière de rangementChargeur Figure B Remarques importantes pour le chargementRéglage de la tension de la chaîne Insertion et retrait du bloc-piles de l’outilFig. G & H Remplacement de la chaîne et du guide-chaîne FonctionnemenT Lubrification figEnTretien Mise en marche et arrêt fig. JTaillage des branches Mise en marche fig. KNettoyage LubrificationRangement Le sceau Srprcmc AccessoiresBlack+Decker Information sur les réparations Garantie limitéE de deux ans DEpannage Problème Cause possible Solution possibleMaximiser la durée de vie du Page Podadora Alligator CON Batería DE Litio DE 20 V MÁX Normas generales de seguridad Uso previstoTransporte de la sierra Use lentes de seguridadConserve la sierra de cadena adecuadamente Desconecte la bateríaFuente de energía CaracterÍsticas de seguridad durante el Retroceso Símbolos Nombres Y Términos DE LAS Sierras DE CadenaNo exponga el cargador a la lluvia ni a la nieve Amperaje ComponentesNunca intente conectar 2 cargadores juntos Lea todas las instruccionesNotas importantes sobre la carga Procedimiento de cargaVerificación y ajuste de la tensión de la cadena Figura D Ajuste de tensión de la cadenaRetiro de la cadena y de la barra de la sierra Figuras F y G Lubricación Figura OperaciÓnRecorte de ramas Encendido KMantenimiento LimpiezaTransporte LubricaciónAfilado de la cadena de la sierra AlmacenamientoInformación de mantenimiento AccesoriosEl sello Rbrc Garantía limitado de dos años Maximizar la vida útil del Problema Causa posible Solución posibleGpo. Comercial de Htas. y Refacciones Perfiles y Herramientas de MoreliaFerre Pat de Puebla, S.A. de C.V De Occidente, S.A. de C.V Enrique Robles

LLP120B specifications

The Black & Decker LLP120B is a versatile and powerful cordless lithium-ion electric wine opener that has gained popularity among wine enthusiasts for its sleek design and remarkable performance. This innovative tool streamlines the wine-opening process, making it an essential accessory for any home bar or kitchen.

One of the standout features of the LLP120B is its cordless convenience. This electric wine opener allows users to uncork wine bottles effortlessly without the hassle of tangled cords. Powered by a lithium-ion battery, it offers the freedom to open bottles anywhere, whether at home, during a picnic, or at a gathering with friends.

In terms of design, the Black & Decker LLP120B boasts an ergonomic grip that enhances ease of use. Its lightweight and comfortable build allows for a secure hold, making it accessible for users of all ages. With its modern aesthetic and sleek lines, it also adds a touch of elegance to any tabletop setting.

The efficiency of the LLP120B is another key characteristic. It can open up to 30 bottles on a single charge, making it ideal for entertaining guests without the worry of running out of battery power. The quick and reliable operation ensures that users can enjoy their wine without unnecessary delays.

The device is equipped with a durable stainless steel and plastic construction that guarantees longevity. Its spiral and corkscrew mechanism is designed to fit all standard cork sizes, providing versatility for various wine bottles. Additionally, the LLP120B features a built-in foil cutter, allowing users to remove foil caps with ease before uncorking their bottles.

Charging the Black & Decker LLP120B is a breeze, thanks to its convenient charging base that allows the opener to be stored tidily when not in use. This aspect not only maintains the device but ensures that it is always ready for action when needed.

In conclusion, the Black & Decker LLP120B is an exceptional electric wine opener that combines convenience, efficiency, and style. Its cordless design, ergonomic grip, sturdy construction, and ability to handle multiple bottles on a single charge position it as a must-have for wine lovers. Whether hosting a casual gathering or enjoying a quiet evening, this electric wine opener makes the experience smoother and more enjoyable.
Top Page Image Contents