Marantz SR6003 1 2 3, 1.3. 1 3 2, English, Manual Tuning, Direct Frequency Call, Using the unit

(Using the remote controller)

1. To select tuner, Press the TUNE button twice within two second on the remote controller.

2. Press the BAND button to select either FM or AM.

3. Press and hold the TUNE 3 or 4 button for 1 second or more.

4. Automatic searching begins then stops when a station is tuned in.

If tuning does not stop at the desired station, use to the “Manual tuning” operation.

MANUAL TUNING

1.3. 2.

1.

3.

2.

(Using the unit)

1. Turn the INPUT SELECTOR knob to select “TUNER”.

2. Press the BAND button to select either FM or AM.

3. Press the 3 or 4 cursor buttons on the front Panel to select the desired station.

(Using the remote controller)

1. To select tuner, press the TUNE button twice within two seconds on the remote controller.

2. Press the BAND button to select either FM or AM.

3. Press the TUNE 3 or 4 button to tune in the deseired station.

DIRECT FREQUENCY CALL

1.

2.

3

4.

1. To select tuner, Press the TUNE button twice within two seconds on the remote controller.

2. Press the BAND button to select either FM or AM.

3. Press the F.DIRECT on the remote controller, display will show “FREQ----”.

4. lnput your desired station’s, frequency with the ten numbered keypad on the remote controller.

5. The desired station will automatically be tuned.

ENGLISH

(FM) TUNING MODE (AUTO STEREO OR MONO)

	NAMES AND	FUNCTION
When in the auto stereo mode, “AUTO” indicator will	BASIC	CONNECTIONS
be illuminated on the display.	OPERATION
“TUNED” and “ST” indicators are not illuminated.
The “ST” indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the	BASIC
station in stereo. In such a case, Press the T-MODE
If the signal is weak, it may be difficult to tune into the
button on the front panel or T.MODE button on the
remote controller.	ADVANCED	CONNECTIONS
button on the front panel or T.MODE button on
“AUTO” indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the “ST”
indicator is not illuminated.
To return to auto stereo mode, Press the T-MODE
the remote controller again. “AUTO” indicator is
illuminated the display.
	SETUP
	ADVANCED	OPERATION
	TROUBLESHOOTING
	OTHERS

17