Marantz SR6003 manual English, Preference, Others

ENGLISH

NAMESAND FUNCTION	5 PREFERENCE
	• Zone A Setup :
	• Zone B Setup :
	“5-1 ZONE SETUP” (see page 39)

•DC Trigger Setup :

BASIC CONNECTIONS	“5-2 DC TRIGGER SETUP” (see page 39)
	1. Select “Preference” from Main Menu with the
	3 or 4 cursor buttons and press the ENTER
	button.
	Preference
	Zone A Setup
BASIC	Zone B Setup
	DC Trigger Setup
	Optical Output	: Rec
OPERATION	Standby Mode	: Economy
	Audio	: Main
	HDMI Audio	: Enable
	HDMI Lip Sync	: Disable
	Return
ADVANCED CONNECTIONS	: Up / Down :	Enter : Select Exit : Exit
	2. Select the desired menu with the 3 or 4 cursor

HDMI Audio:

This setting determines whether to play back audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector.

Enable: The audio input to the HDMI jacks can be played back by this unit.

In such case, audio signals are not output to the TV or projector.

Through: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc.

HDMI Lipsync:

Video signals may take longer to process than audio signals depending on the connected video equipment.

When the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a, audio and video can be automatically synchronized using this function.

Use the 1 or 2 cursor buttons to switch between Enable and Disable.

Enable: Auto Lipsync Correction is used to synchronize audio and video.

Disable: Deactivates this function.

Zone A Setup

Audio Source

Sleep Timer

Stereo / Mono.

Zone Pre Out

Volume Mode Level

Zone Speaker Out

Volume Mode

Level

Return

Preference

Zone A Setup

Zone B Setup

DC Trigger Setup

Optical

Standby Mode

Audio

HDMI Audio

HDMI Lip Sync

Return

: Up / Down :

:DVD

:Off

:Stereo

:Off

:Variable

:-90dB

:* * *

:* * *

:* * *

:Rec

:Economy

:Main

:Enable

:Disable

Enter : Select Exit : Exit

DC Trigger Setup
TriggerSystem Error!!	: Disable
TV	: * * *
DVD	: * * *
VCR	: * * *
DSS	: * * *
AUX1	: * * *
TAPE	: * * *
CD/R	: * * *
7.1ch Input / AUX2	: * * *
Tuner	: * * *
USB Audio	: * * *
Return

buttons and press the ENTER button.

	Optical:
	Select when using equipment with optical digital
SETUP	output.
	Rec:	Select when recording to a CD
		recorder or MD recorder.
	Zone B:	(See page 12)
		Select when using ZONE B.
		(See pages 21, 39, 64)
ADVANCED OPERATION	Standby:
	When this is set to “Economy”, you can reduce the
	power consumption when the unit is in the Standby
	mode. When “Economy” is selected, “TV Auto”
	and “RS-232C” are disabled when the unit is in the
	Standby mode.
	Audio:
TROUBLESHOOTING	In the Audio mode, Dolby Digital and DTS output
	is set to either “Main” or “Sub”. Select “Audio” with
	the 1 or 2 cursor buttons, then select Main ↔ Sub
	↔ Main+Sub with the 1 or 2 cursor buttons.
OTHERS

Note:

•This function is not available when the unit is connected to equipment that does not support HDMI 1.3a or Auto Lipsync Correction. For details, check the user’s manual of the connected equipment.

•If this function is unavailable, you can use the regular Lipsync function to synchronize audio and video. (See page 45)

After you complete this portion of the setup, move the cursor to “Return” with the 3 or 4 cursor buttons and press the ENTER button.

: Up / Down : Change Enter : Exit : Exit

Zone B Setup
Audio Source	: DVD (Dig.2)
Sleep Timer	: Off
Zone Digital Out	: Off
Return

: Up / Down : Change Enter : Exit : Exit

: Up / Down : Change Enter : Exit : Exit

38