Marantz SR6003 English, 6-1PRESET G. EQ ADJ, 6-2CHECK AUTO, Notes, Names And, Function, Basic

6-1 PRESET G. EQ ADJ

These modes allow you to set a 9-band graphic equalizer for each of the 7 channels.

1. Select “Acoustic EQ” from Main Menu with the 3 or 4 cursor buttons and press the ENTER

button.

2. Select “Preset Graphic EQ Adjust” with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the selection.

Preset Adjust
Reset	: Channel
Channel	: Front Left
63Hz	: 0.0dB	[dB]
		+9dB
125Hz	: 0.0dB	0dB
	: 0.0dB
250Hz		-9dB
500Hz	: 0.0dB	-18dB
1kHz	: 0.0dB		63 125 250 500 1k	2k 4k 8k 16k
2kHz	: 0.0dB				[Hz]
4kHz	: 0.0dB
8kHz	: 0.0dB
16kHz	: 0.0dB
Return
: Up / Down	: Change	Enter :		Exit : Exit

Reset:

Using the 1 or 2 cursor buttons, select the channel(s) to be reset to either the currently displayed channel (“Channel”) or all channels (“All-Channel”), and press the ENTER button to enter the setting.

“All-Channel” : Resets all channels.

“Channel” : Resets only the currently displayed channel.

Channel:

Select the channel (“Front Left”, “Center”, “Front Right”, “Surround Right”, “Surround Back Right”, “Surround Back Left” or “Surround Left”) to adjust with the 1 or 2 cursor buttons, and switch to the adjustment mode with the 4 cursor button.

Frequency:

Select the target frequency on the graph with the 3 or 4 cursor buttons. Adjust the level with the 1 or 2 cursor buttons. (Note that this can be adjusted to any level between –20and +9 dB in 0.5 dB increments.)

Move to the next frequency with the 3 or 4 cursor buttons, and adjust the level.

After you complete this portion of the setup move cursor to “Return” with the 3 or 4 cursor buttons and press the ENTER button.

6-2 CHECK AUTO

These menus are for confirming the results of Auto Setup function equalizer measurement (Audyssey Front, Audyssey Flat, Audyssey).

1. Select “Acoustic EQ” from Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “Check Auto EQ” with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the selection.

Check Auto
EQ. Mode	: Audyssey
Channel	: Center
63Hz	: -15.0dB		[dB]
			+9dB
125Hz	:	-2.0dB	0dB
250Hz	:	-5.0dB
			-9dB
500Hz	: +9.0dB		-18dB
1kHz	: +3.0dB			63 125 250 500 1k	2k 4k 8k 16k
2kHz	:	-5.0dB				[Hz]
4kHz	:	-7.0dB
8kHz	: -18.0dB
16kHz	: -20.0dB
Return
: Up / Down	: Change		Enter :		Exit : Exit

EQ. Mode:

Select EQ (mode) with the 1 or 2 cursor buttons followed by the desired equalizer (“Audyssey”, “Audyssey Front”, “Audyssey Flat”).

Channel:

Select the channel to check with the 1 or 2 cursor buttons.

Notes:

•The frequency will not be exactly the same as in the Preset Graphic EQ modes.

•Front Left and Front Right are not indicated on the Audyssey Front mode.

4.Once finished checking, select “Return” with the 3 or 4 cursor buttons and press the ENTER button to return to the “Acoustic EQ” menu.

ENGLISH

NAMES AND	FUNCTION
BASIC	CONNECTIONS
BASIC OPERATION
ADVANCED	CONNECTIONS
SETUP
ADVANCED	OPERATION
TROUBLESHOOTING
OTHERS

41