Marantz SR6003 manual English, Others, Notes

	ENGLISH
NAMES FUNCTION	6 ACOUSTIC EQ
	This display is for setting up the equalizer and

After you complete this portion of the setup, move the cursor to “RETURN” with the 3 or 4 cursor buttons and press the ENTER button.

Acoustic EQ.

EQ. Mode: Off

Preset Graphic EQ. Adjust

Check Auto EQ.

AND	changing the Equalizer mode.
	• Preset Graphic EQ Adjust :
BASIC CONNECTIONS	“6-1 PRESET G. EQ ADJ” (see page 41)
	• Check Auto EQ :
	“6-2 CHECK AUTO” (see page 41)
	EQ Mode:
	There are 4 equalizer modes to choose from: Preset
BASIC	Graphic EQ that allows the user to manually adjust
	the equalizer, and Audyssey, Audyssey Front and
	Audyssey Flat that automatically adjust the equalizer
	from the measurement results of the Auto Setup
OPERATION
	feature (see page 30).
	Audyssey Front:
	This mode matches the characteristics of each
ADVANCED CONNECTIONS	speaker to those of the front speakers.
	Audyssey Flat:
	This mode flattens the frequency characteristics of
	all speakers. It is suited for playback of multichannel
	music such as Dolby Digital and DTS.
	Audyssey:
	This mode adjusts the frequency characteristics
	of all speakers so as to create the best listening
SETUP	environment for the sound characteristics of the
	listening room.
	Preset:
	This mode adjusts the graphic equalizer that was
	set in Preset Graphic EQ Adjust to adjust the
	characteristics of each speaker (see page 41).
ADVANCED OPERATION	Off:
	The graphic equalizer is not used.
	1. Select “Acoustic EQ” from Main Menu with the
	3 or 4 cursor buttons and press the ENTER
	button.
TROUBLESHOOTING	2. Select “EQ. Mode” with the 3 or 4 cursor
	buttons.
	3. Select “Audyssey Front”, “Audyssey Flat”,
	“Audyssey”, “Preset” or “Off” with the 1 or 2
	cursor buttons.
OTHERS

To use the remote controller (RC003SR) to change the EQ Mode, press the AMP button and press the EQ button.

Each time this button is pressed, the EQ Mode changes as follows.

Off Audyssey Front Audyssey Flat

Preset Audyssey

Notes:

•“Audyssey Front”, “Audyssey Flat” and “Audyssey” can be selected after executing the Auto Setup feature.

•If a speaker that was determined “No” in Auto Setup is manually turned on, the “Audyssey”, “Audyssey Front” and “Audyssey Flat” modes cannot be selected.

•The equalizer turns off when the Pure Direct mode, Source Direct mode, Dolby Headphone or Virtual mode is set.

•Acoustic EQ Modes are not used during playback of Dolby TrueHD, Dolby Digital Plus, or DTS-HD signals.

Even in this case, settings made using Speaker Auto Setup (speaker yes/no, distance, size, channel level, crossover) are enabled.

•Tone Control is disabled when an EQ Mode is in use.

Return

: Up / Down : Change

Preset Adjust
Reset	: Channel
Channel	: Front Left
63Hz	: 0.0dB	[dB]
		+9dB
125Hz	: 0.0dB	0dB
	: 0.0dB
250Hz		-9dB
500Hz	: 0.0dB	-18dB
1kHz	: 0.0dB		63 125 250 500 1k	2k 4k 8k 16k
2kHz	: 0.0dB				[Hz]
4kHz	: 0.0dB
8kHz	: 0.0dB
16kHz	: 0.0dB
Return
: Up / Down	: Change	Enter :		Exit : Exit

Enter : Exit : Exit

Check Auto
EQ. Mode	: Audyssey
Channel	: Front Left
63Hz	: -15.0dB		[dB]
			+9dB
125Hz	:	-2.0dB	0dB
250Hz	:	-5.0dB
			-9dB
500Hz	: +9.0dB		-18dB
1kHz	: +3.0dB			63 125 250 500 1k	2k 4k 8k 16k
2kHz	:	-5.0dB				[Hz]
4kHz	:	-7.0dB
8kHz	: -18.0dB
16kHz	: -20.0dB
Return
: Up / Down	: Change		Enter :		Exit : Exit

40