FUNCTION | NAMES AND |
CONNECTIONS | BASIC |
BASIC OPERATION | |
CONNECTIONS | ADVANCED |
SETUP | |
OPERATION | ADVANCED |
TROUBLESHOOTING | |
OTHERS | |
ENGLISH
CLEARING MACRO PROGRAMS
The following procedure is used to erase macros you have programmed into the remote controller’s memory.
3.
1.
2.
2.
1. Press and hold the MACRO and MENU button until the LEARN, MACRO indicators and MACRO are displayed blinking on the LCD.
2. Press and hold the CL button, then press the button for the numeric button to be cleared for 3 seconds. (in this case “2”)
•
3. Press the ENTER button to clear and return step 1.
•To cancel the memory clearing operation, do not press ENTER button and simply touch any other button.
4.To return the normal mode, press and hold down the ENTER button until MACRO indicator is disappeared on the LCD and returns to normal mode.
ADJUSTING THE INTERVAL TIME OF MACRO OPERATIONS TRANSMITTING
1. 
4.
3.
1.
1. Press and hold the MACRO and SETUP button
until the SETUP is displayed on the LCD.
• SETUP is displayed for 3 seconds.
2. Confirm the display changes from SETUP to MCRxx. (“xx” means the interval time of macro operations transmitting)
3. Press the cursor button (1 or 2) to change the interval time.
•The interval time can be changed from 0.5 to 5 seconds by 0.5 seconds step.
4.Press and hold down the ENTER button until MACRO indicator is disappeared on the LCD and returns to normal mode.
74