Marantz SR6003 English, Analog Video Conversion, Up-Conversionfrom Analog Video, Signals To Hdmi

	ENGLISH
NAMES AND FUNCTION	VIDEO CONVERT
	ANALOG VIDEO CONVERSION
	This unit is equipped to convert video signals
	for monitor output. Because of this, indifferent of
	the connection (VIDEO, S-VIDEO, COMPONENT
BASIC CONNECTIONS	VIDEO) between the playback device and this unit,
	listening and viewing are possible with a single
	higher grade cable between the MONITOR OUT
	terminal of the unit and the monitor.
	UP-CONVERSION FROM ANALOG VIDEO
	SIGNALS TO HDMI
BASIC	The up-conversion feature of this unit can output
	the input analog video signals (for component video
OPERATION	signals of 480i, 480p, 1080i and 720p resolution, and
	S-Video and Video (composite) of 480i resolution) to
	the HDMI MONITOR terminal.
	Notes:
ADVANCED CONNECTIONS	• HDMI video input is only output to the HDMI
	MONITOR OUT terminal of the unit. If connecting
	a playback device such as a DVD player to the
	HDMI input jack, connect the HDMI MONITOR
	OUT terminal of the unit to a TV monitor.
	• This mode is unavailable for the REC out terminal.

CONNECTION EXAMPLE

•When a monitor is connected to the HDMI MONITOR OUT terminal of the unit

VIDEO
or S-VIDEO
or component
or HDMI	HDMI
Notes:

•If the resolution of the component video signal input from the playback device is other than 480i, 480p, 1080i or 720p, images are not output from the HDMI MONITOR OUT terminal of the unit.

•If the resolution of the S-Video or Video signal input from the playback device is other than 480i, images are not output from the HDMI MONITOR OUT terminal of the unit.

•When a monitor is connected to the VIDEO or S- VIDEO MONITOR OUT terminals of the unit

Notes:

•The HDMI video signal input from the playback device is not output from the COMPONENT VIDEO MONITOR OUT terminal of the unit.

Notes of OSD menu system:

•The setup menu can be displayed through all video out terminals (“HDMI”, “COMPONENT”, “SVIDEO” and “VIDEO”).

•OSD information is output only to the VIDEO and S-VIDEO MONITOR OUT terminals.

OSD information is also output when the video conversion feature is on and the video signal input to the VIDEO or S-VIDEO input jack of the unit is converted and output from the COMPONENT VIDEO or HDMI MONITOR OUT terminals.

I/P CONVERT

The video circuit of the unit is equipped with an I/P conversion feature.

When this feature is on, 480i analog video signals (VIDEO, S-VIDEO or COMPONENT VIDEO) input from a playback device can be converted to 480p and progressively output to the COMPONENT VIDEO or HDMI MONITOR OUT terminals of the unit.

(For setting instructions, see page 37)

HDMI RESOLUTION

This function is used to output the analog video signal to HDMI as follows.

•480i signals can be converted to 480p, 1080i,

720p or 1080p signals, while 480p signals can be converted to 1080i, 720p or 1080p signals.

•720p signals can be converted to 1080i or 1080p.

•1080i signals can be converted to 1080p.

•The output resolution can be set for HDMI OUT 1 and HDMI OUT 2.

Notes:

•Do not set to 1080i, 720p or 1080p when connected to a monitor that does not support 1080i, 720p or 1080p signals. The SETUP MENU will not be displayed. If the SETUP MENU is not displayed, change settings while viewing the main unit display panel.

•The resolution of analog component output cannot be changed.

•HDMI OUT 1 and HDMI OUT 2 cannot be output simultaneously.

	• This mode is unavailable for still picture, fast
	forward and reverse play on video component.
	• If, while attempting to use the video convert feature,
SETUP	the unit cannot synchronize with the display device,
	“NO SIGNAL” appears on the monitor or noise is
	generated, this feature cannot be used. All of these
	signs are caused by equipment incompatibility; there
	is nothing wrong with the unit.
	If this occurs, set “VIDEO CONVERT” in the

VIDEO

or S-VIDEO

or component

HDMI

VIDEO

or S-VIDEO

Note:

When a monitor is connected to the HDMI MONITOR OUT terminal, and HDMI RESOLUTION is set to 720p, 1080i, 1080p, or AUTO, the I/P CONVERT for COMPONENT VIDEO OUTPUT does not function.

HDMI OUT

ADVANCED OPERATION	“VIDEO SETUP” menu to “DISABLE”. Next,
	connect the video input signal to the display component
	via the MONITOR OUT terminal under VIDEO and
	the S-video input signal to the display component via
	the MONITOR OUT terminal under S-VIDEO.
	• The video convert feature constantly monitors
	input video signals and determines whether to
TROUBLESHOOTING	convert the input signals or not. However, some
	input video signals cannot be detected correctly.
	If this occurs, set “VIDEO CONVERT” in the
	“VIDEO SETUP” menu to “DISABLE”.
OTHERS

Notes:

•The HDMI video signal input from the playback device is not output from the VIDEO or S-VIDEO MONITOR OUT terminals of the unit.

•If the resolution of the component video signal input from the playback device is other than 480i, it is not output from the VIDEO or S-VIDEO MONITOR OUT terminals of the unit.

•When a monitor is connected to the COMPONENT VIDEO MONITOR OUT terminal of the unit

VIDEO
or S-VIDEO	component
or component
HDMI

HDMI OUTPUT 1 or 2 can be selected and used with this unit.

Each time the HDMI button on the remote controller is pressed, OUTPUT 1 is switched to OUTPUT 2 or vice versa.

HDMI OUT 1 and HDMI OUT 2 cannot be output simultaneously.

H D M I - O = O U T 1

46