ENGLISH
NAMESAND FUNCTION | ERASING PROGRAMMED CODES | |
(RETURNING TO INITIAL SETTINGS) | ||
| ||
| Codes can be erased in three ways: by buttons, | |
| sources, and by all memory contents. | |
| Erasing the code by buttons | |
BASIC CONNECTIONS | 1. Press and hold down the SET and SETUP | |
buttons until LEARN indicator blinks. | ||
| ||
BASIC OPERATION | 2. Select the SOURCE button to select the button | |
| ||
ADVANCED CONNECTIONS | to be erased. | |
The source name is displayed on the LCD. | ||
| ||
SETUP |
| |
| 3. Press and hold down the HDMI button and | |
ADVANCED OPERATION | press the learned button twice to be erased. | |
• “ERASE” is displayed on the LCD and the | ||
| ||
| mode returns to LEARN mode. | |
TROUBLESHOOTING |
| |
OTHERS | 4. To return the NORMAL mode, press the SET | |
button. | ||
|
Erasing the code by SOURCE
1. Press and hold down the SET and SETUP buttons until LEARN indicator blinks.
2. Press and hold down the HDMI button and press the learned SOURCE button twice to be erased.
• “ERASE” is displayed on the LCD.
3. Press ENTER button to continue erasing.
•The 
indicator blinks twice and the mode returns to LEARN mode.
•To cancel the erasing operation, do not press ENTER button and simply touch any other button.
4. To return the NORMAL mode, press the SET button.
Erasing the all SOURCES
1. Press and hold down the SET and SETUP buttons until LEARN indicator blinks.
2. Press and hold down the HDMI button and press POWER ON and POWER OFF button.
• LEARN indicator lights.
3. Press ENTER button to continue erasing.
•“ERASE” is displayed on the LCD and the mode returns to LEARN mode.
•To cancel the erasing operation, do not press ENTER button and simply touch any other button.
4. To return the NORMAL mode, press the SET button.
Note:
Erasing codes will return to the factory preset code, or there will leave empty if the button has no factory preset code.
70