2. 2 3, 3. 5. 2. 3 5 2 3 5, English, Preset Scan

The stored preset number blinks in the display for 5 seconds.WhiIe blinking, press the CLEAR button on the front panel or CL button on the remote controller.

		ENGLISH
NAMESAND FUNCTION	PRESET SCAN
NAMESAND FUNCTION		1.
		1.
BASIC CONNECTIONS		5.
BASIC		2.
BASIC		3.
OPERATION		6.
OPERATION	1. Press the TUNE button twice within two
ADVANCED CONNECTIONS		seconds on the remote controller.
ADVANCED CONNECTIONS	2. Press the BAND button to select SIRIUS
		band.
	3. press the P.SCAN button on the remote
		controller.
	4.	Preset channels are recalled in sequence (No.1
		→ No.2 → etc.) for about 10 seconds each.The
		time changes by the received condition. No
SETUP		stored preset number will be skipped.
SETUP	5.	Pressing the 2cursor button during prescanning
		speeds up scanning.
		Also, pressing the 1 cursor button returns to
		the previous preset channel.
ADVANCED OPERATION	6. When the desired preset channel is received,
ADVANCED OPERATION		cancel the preset scan operation by press the
		cancel the preset scan operation by press the
		P.SCAN button.
TROUBLESHOOTING
OTHERS

CLEARING STORED PRESET CHANNELS

You can remove preset channels from the memory using the following procedure.

2. 3.

1. Recall the preset number to be cleared with the method described in ”PRESET SEARCH MODE”.

2. Press the MEMORY button on the front panel or the MEMO button on the remote controller.

4. “xx CLEAR” appears on the dispIay to indicate that the specified preset number has been cleared.

Note:

•To clear all stored preset channels, press and hold the T-MODEand the ENTER buttons on the unit for two seconds.

PARENTAL LOCK

This function is used to lock channels you do not want to receive.

SETTING/RELEASING PARENTAL LOCK

3. 5. 2. 5.

1. Tune to the channel that you want to set parental lock.

2. Press the T-MODEbutton on the main unit or the P.LOCK button on the remote controller.

P A S S W O R D

3. When [PASSWORD ****] appears, use the cursor buttons on the main unit or remote controller, or the numeric buttons on the remote controller, to enter a password (4 digits), then press the ENTER button on the main unit or the remote controller.

Note:

The password is set to 9999 when shipped from the factory.

P A S W O R D O K !

			7
7	7			7
S R 0 0 17				7
S R 0 0 17				7a b c d e f g
7				7
7				7
		7	7

4. When the correct password is entered, [PASSWORD OK!] is displayed and the display ﬂashes “✔” or “:”.

5. Set parental lock on/off using the 3 / 4 cursor buttons on the main unit or remote controller, then confirm the setting using the ENTER button on the main unit or remote controller.

“✔” Lock status

“:” Unlock status

You can unlock all locked channels at this time by pressing the CLEAR button on the main unit or CL button on the remote controller for 5 seconds. When “ALL UNLOCK?” is displayed, press the ENTER button on the main unit or remote controller. “UNLOCKING..” is displayed and all locked channels are unlocked.

Notes:

•If you mistakenly enter the wrong password, you will be asked to reenter the password.

•You can exit parental lock mode using the EXIT button on the main unit or CLEAR button on the remote controller.

•No sound will be output when you tune to a locked channel.

•Although parental lock can be set for more than one channel, all channels will share the same password.

•You cannot set Parental Lock for Channel 0.