Marantz SR6003 manual English, Function, Basic, Advanced, Others, surround back speakers

FUNCTION	NAMES AND
CONNECTIONS	BASIC
BASIC OPERATION
CONNECTIONS	ADVANCED
SETUP
OPERATION	ADVANCED
TROUBLESHOOTING
OTHERS

ENGLISH

ERROR MESSAGES

Displayed Error	Cause	How to Remedy
Mic Setup Error!!	• The microphone is not properly connected.	• Connect the included microphone.
Audyssey MultEQ Setup		• Check the microphone connection.
StartManual Setup
Main Zone Surround Back : 2ch
Return
Mic Setup Error
Check Microphone

: : Enter : Exit : Exit

Noise Error!!	• There is too much noise in the listening room to measure properly.	• During measurement, turn off devices that make noise such as air
Audyssey MultEQ Setup	• Volume from the speakers is low.	conditioners.
Speaker Check : * *		• Measure at a time when the surrounding area is quiet.
Noise Error!!

: : Enter : Exit : Exit

Analyze Error!!	• The speakers required for suitable playback were not detected.	• Check the speaker that is indicated as having reversed polarity
Audyssey MultEQ Setup	• Speaker polarity is connected backwards.	([Rev] can appear with some speakers even when properly
Speaker Check : * *
		connected. In such case, ignore the error indication.)
Analyze Error!!
		• Check speaker direction and layout
Result
Return	In the examples at left, the following trouble is detected.
	• The polarity of the left and right channels of the front speakers is
	backwards ([Rev] appears on the display.)
	• The surround speaker is not connected ([No] is displayed), but the
	surround back speaker is connected

		(In this kind of situation, [Err] is displayed for all surround and
: Up / Down :	Enter : Return Exit : Exit	surround back speakers.)

*Under Analyze Error, select “Result” with the 3/4 cursor buttons and press the ENTER button. A detail screen like the following appears on the display.

	Speakers Config			An error is indicated in addition to the above if the speakers are
				connected as follows.
	Check Speaker Results
	Front Left	: Yes	Rev	• When using just one surround back speaker, but it is connected to
	Center	: No		the surround back R-channel
	Front Right	: Yes	Rev	(To use just one surround back speaker, connect it to the L-
	Surround Right	: No	Err
	Surround Back Right	: Yes	Err	channel.)
	Surround Back Left	: Yes	Err
	Surround Left	: No	Err Rev
	Subwoofer	: Yes
	Return
:	:		Enter : Return	Exit : Exit

32