Husqvarna ProFlex 18 manual 6007-210

Page 19

DRIVING

3.Select the required cutting height (1–7) with the cutting height lever.

4.Push in the lock button on the lift lever and lower down the cutting unit.

6007-210

6007-211

English – 17

Image 19

Contents English Rider ProFlexSvenska Contents Towing InstructionDear customer Travel and transport on public roadsGood service Safety InstructionsSerial number Read the instructions Explanation of SymbolsGeneral use Safety instructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Never run the machine in an enclosed area TransportPresentation PresentationLocation of the controls Speed of the machine is steplessly regulated Throttle controlChoke lever Speed limiterLift lever for cutting unit Cutting unitFuelling Lever for adjustment of the cutting heightParking brake SeatBefore starting DrivingStarting the engine Driving the machine 6007-210 MAX Cutting tipsDisengage lever Stopping the engineMaintenance schedule MaintenanceYear Year 100 300 Hours Before afterRight-hand fender Dismantling of the machine hoodsEngine hood NoseTransmission cover Check the engine’s cooling air intakeCheck the transmission’s air intake Left-hand fenderChecking and adjustment of the steering wires Checking and adjusting the choke wire Checking and adjustment of the throttle wireAdjusting the hydrostatic wire Poorly adjusted brakes can result in reduced braking power Adjusting the brakesChecking the tyre pressure Replacing the air filter Cleaning the pulse air filter Replacement of the fuel filterChecking of the fuel pump’s air filter Procedures on contact with acid Check the level of the battery acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Take care. Risk of crushing injury Fitting the cutting unitWatch your fingers. Do not turn the blades or belt Belt diagramCheck that the belt is fitted around the tension roller Cutting height ParallelismReplacing the break-pin BioClip Checking the blades Service position for the cutting unitPlacing in the service position Releasing from the service positionDismantling the cutting unit 8009-169 Dismantling the belt Removing the attachment frameAssembling the belt Replacing the cutting unit’s belts Belt replacement on BioClipBelt replacement on BioClip112 Cutting unit models Removal of BioClip plug CombiLubrication Lubrication chartGeneral Lubricating wiresPedal mechanism in frame tunnel Engine oil Chains in frame tunnelTransmission Gear leverTriangular link Throttle and choke wires, lever bearingsDriver’s seat Transmission oil level Oil filter, replacementParking brake wire Belt tensionerProblem Procedure Trouble Shooting ScheduleStorage ServiceWinter storage Wiring Diagram Rider ProFlex Technical DataRear ejector BioClip Rear ejector CombiEU declaration of conformity Only applies to Europe EU-DECLARATION of ConformityWork done ServicejournalPre-delivery service After first 8 hoursHour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´+H%,¶6c¨ English 114 00