Husqvarna ProFlex 18 manual Servicejournal

Page 62

SERVICEJOURNAL

Work done

Date, mileage, stamp, sign

300 hour service

1.Inspect the machine. Additional work?

2.Change engine oil.

3.Replace the air filter (oil-foam element).

4.Replace air filter ( paper air filter).

5.Clean the fuel pump air filter.

6.Check/adjust cutting height setting.

7.Check/adjust parking brake.

8.Inspect flame guard/spark arrestor (optional equipment)

9.Replace engine oil filter.

10.Clean/replace spark plug.

11.Replace fuel filter in fuel line.

12.Clean pulse-air filter.

13.Clean the cooling flanges on the cylinders and cylinder head.

14.Check engine valve clearance.

15.Check if it is necessary to change the oil in the K62 gearbox (every 500 hours).

60 – English

Image 62

Contents Rider ProFlex EnglishSvenska Contents Travel and transport on public roads InstructionDear customer TowingSerial number Safety InstructionsGood service Explanation of Symbols Read the instructionsSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Never run the machine in an enclosed areaLocation of the controls PresentationPresentation Speed limiter Throttle controlChoke lever Speed of the machine is steplessly regulatedCutting unit Lift lever for cutting unitSeat Lever for adjustment of the cutting heightParking brake FuellingStarting the engine DrivingBefore starting Driving the machine 6007-210 Cutting tips MAXStopping the engine Disengage leverYear MaintenanceMaintenance schedule Hours Before after Year 100 300Nose Dismantling of the machine hoodsEngine hood Right-hand fenderLeft-hand fender Check the engine’s cooling air intakeCheck the transmission’s air intake Transmission coverChecking and adjustment of the steering wires Checking and adjustment of the throttle wire Checking and adjusting the choke wireAdjusting the hydrostatic wire Checking the tyre pressure Adjusting the brakesPoorly adjusted brakes can result in reduced braking power Replacing the air filter Checking of the fuel pump’s air filter Replacement of the fuel filterCleaning the pulse air filter Fitting the wrong spark plug type can damage the engine Check the level of the battery acidProcedures on contact with acid Inspecting the safety system Fitting the cutting unit Take care. Risk of crushing injuryCheck that the belt is fitted around the tension roller Belt diagramWatch your fingers. Do not turn the blades or belt Parallelism Cutting heightReplacing the break-pin BioClip Releasing from the service position Service position for the cutting unitPlacing in the service position Checking the bladesDismantling the cutting unit 8009-169 Removing the attachment frame Dismantling the beltAssembling the belt Belt replacement on BioClip Replacing the cutting unit’s beltsBelt replacement on BioClip112 Removal of BioClip plug Combi Cutting unit modelsLubrication chart LubricationPedal mechanism in frame tunnel Lubricating wiresGeneral Chains in frame tunnel Engine oilGear lever TransmissionDriver’s seat Throttle and choke wires, lever bearingsTriangular link Belt tensioner Oil filter, replacementParking brake wire Transmission oil levelTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage Wiring Diagram Technical Data Rider ProFlexRear ejector Combi Rear ejector BioClipEU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropeAfter first 8 hours ServicejournalPre-delivery service Work doneHour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´+H%,¶6c¨ English 114 00