Husqvarna ProFlex 18 manual Hours Before after, Year 100 300

MAINTENANCE

Maintenance	Page	Daily main-	Weekly3)	At least	Maintenance interval in
		tenance	main-	once a	hours
		before after	tenance	year	25	50	100	300
Lubricate throttle control	48		●
Lubricate choke control	48		●
Smörj styrkedja i ramtunnel.	46		●
Lubricate steering chain inside frame
tunnel	24		●
Clean engine cooling air intake	23			●	●
Clean the air filter pre-filter (oil-foam)	28			●	●
Change engine oil1)	46			●			●
Clean the air filter cartridge2) (paper filter)	28			●		●	●
Check/adjust cutting height setting	34			●		●
Check/adjust parking brake	27			●		●
Inspect flame guard/spark arrestor
(optional equipment)	-			❍		❍
Replace engine oil filter
(every 200 hours)	49			●			●
Clean/replace spark plugs	30			●			●
Replace fuel filter in pipe	29			●			●
Clean pulse-air filter	29			●			●
Clean the cooling flanges	-			❍			❍
Check engine valve clearance4)	-			❍				❍
Check whether oil change4) are
necessary for gearbox (every 500 hrs)	-			❍			❍
Replace the air filter pre-filter (oil-foam)2)	28			●				●
Replace air filter (paper filter)2)
(every 200 hours)	28			●			●
Carry out 300 hour service 4)	60			❍				❍

1)First change after 8 hours. 2)When driving with a heavy load or when the ambient temperature is high, replace every 50 hours. Clean and replace the filter more often in dusty conditions. 3) For daily use of the machine lubrication should be conducted twice a week.

4)Conducted by authorised service workshop.

●= Described in these instructions.

❍= Not described in these instructions.

WARNING!

No service procedures must be conducted on the engine or cutting unit unless:

•The engine is switched off.

•The ignition key is removed.

•The ignition cables are removed from the plugs.

•The parking brake is applied.

•The cutting unit is disengaged.

English – 21