Husqvarna ProFlex 18 manual Keep children away from the area to be mowed

Page 8

SAFETY INSTRUCTIONS

Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgment or co-ordination.

Keep an eye on the traffic when working close to a road or when crossing it.

Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

Never allow children or other persons not trained in the use of the machine to use or service it. Local laws may regulate the age of the user.

WARNING!

Engine exhaust, some of its constituents and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive impairment. The engine emits carbon monoxide, which is a colourless, poisonous gas. Do not use the machine in enclosed spaces.

6003-006

Keep children away from the area to be mowed.

WARNING!

You must use approved personal protective equipment whenever you use the ma- chine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

Make sure that you have first aid equipment

close at hand when using the machine.

Never use the machine when barefoot. Always wear protective shoes or protective boots,

preferably with steel toes.

Wear approved protective glasses or full-face visor during assembly and when operating.

Never wear loose fitting clothes that can catch in moving parts.

8011-292

Personal protective equipment.

6 – English

Image 8
Contents Rider ProFlex EnglishSvenska Contents Instruction Dear customerTravel and transport on public roads TowingSerial number Safety InstructionsGood service Explanation of Symbols Read the instructionsSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Never run the machine in an enclosed areaLocation of the controls PresentationPresentation Throttle control Choke leverSpeed limiter Speed of the machine is steplessly regulatedCutting unit Lift lever for cutting unitLever for adjustment of the cutting height Parking brakeSeat FuellingStarting the engine DrivingBefore starting Driving the machine 6007-210 Cutting tips MAXStopping the engine Disengage leverYear MaintenanceMaintenance schedule Hours Before after Year 100 300Dismantling of the machine hoods Engine hoodNose Right-hand fenderCheck the engine’s cooling air intake Check the transmission’s air intakeLeft-hand fender Transmission coverChecking and adjustment of the steering wires Checking and adjustment of the throttle wire Checking and adjusting the choke wireAdjusting the hydrostatic wire Checking the tyre pressure Adjusting the brakesPoorly adjusted brakes can result in reduced braking power Replacing the air filter Checking of the fuel pump’s air filter Replacement of the fuel filterCleaning the pulse air filter Fitting the wrong spark plug type can damage the engine Check the level of the battery acidProcedures on contact with acid Inspecting the safety system Fitting the cutting unit Take care. Risk of crushing injuryCheck that the belt is fitted around the tension roller Belt diagramWatch your fingers. Do not turn the blades or belt Parallelism Cutting heightReplacing the break-pin BioClip Service position for the cutting unit Placing in the service positionReleasing from the service position Checking the bladesDismantling the cutting unit 8009-169 Removing the attachment frame Dismantling the beltAssembling the belt Belt replacement on BioClip Replacing the cutting unit’s beltsBelt replacement on BioClip112 Removal of BioClip plug Combi Cutting unit modelsLubrication chart LubricationPedal mechanism in frame tunnel Lubricating wiresGeneral Chains in frame tunnel Engine oilGear lever TransmissionDriver’s seat Throttle and choke wires, lever bearingsTriangular link Oil filter, replacement Parking brake wireBelt tensioner Transmission oil levelTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage Wiring Diagram Technical Data Rider ProFlexRear ejector Combi Rear ejector BioClipEU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropeServicejournal Pre-delivery serviceAfter first 8 hours Work doneHour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´+H%,¶6c¨ English 114 00