Chapter 2 Provisioning
Step by Step Installation and Initial Configuration
Cisco PTC Patch Information
This section identifies and describes how to install the Cisco PTC 2.1.1 patches you must install after the Cisco PTC product and component software have been installed.
Table
Patch Number
1
2
4
Patch File Name
02_01_18_01.tar
02_01_18_02.tar
02_01_18_04.tar
You can access the Cisco PTC 2.1.1 patches at the following location:
Read the README.txt file for detailed instructions on how to install the Cisco PTC 2.1.1 patches. You must install all of the Cisco PTC patches listed in Table
Synchronizing CMNM with the SC2200
This section describes the steps you are required to perform to ensure the CMNM application is synchronized with the SC2200 prior to performing a Cisco PTC Cold Start.
Step 1 Start the CEMF Launchpad on the CMNM host as you did in section 4.6.8 and log in (user admin, password admin).
[1] 19680
Starting CEMF Manager Applications.
ILOG Views 3.0.2, Copyright (C)
ILOG TGO 1.0.3, Copyright (C)
Step 2 Click the Viewer icon in the CEMF Launchpad window.
Step 3 Click the
Step 4
Step 5 Click on the Rediscover button in the States pane in the MGC Node States window.
Step 6 Click yes to confirm.
Synchronization between the CMNM and the SC2200 is complete. You should now start the Cisco PTC servers.
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
|
| |
|
