Chapter 2 Provisioning

Step by Step Installation and Initial Configuration

Installation Overview

The installation procedure for the Cisco CNS Configuration Registrar is straightforward. The software is installed and configured through a console connection to the serial port. The console connection parameters are the same as for other Cisco IOS devices, that is:

9600 baud

Parity: 8/None

Stop bits: 1.

 

 

 

Step 1

After the Cisco CNS IE2100 appliance is optionally racked, plugged in, and turned on, insert the

 

 

 

 

CDROM installation disk and press the Reset button.

 

 

 

 

You can not monitor the installation procedure as the console logic does not begin until the Operating

 

 

 

 

System is started. After the automatic installation procedure completes, the CD ejects automatically and

 

 

 

 

the system restarts, at which point the login prompt appears in the Console window.

 

 

 

Step 2

Log in as user setup.

 

 

 

 

The Setup program starts.

 

 

 

Step 3

Enter responses to the prompts that appear.

 

 

 

 

After you enter a response, you cannot edit it again. To change an entered response, you must exit the

 

 

 

 

Setup program and enter your responses again. You can exit the Setup program in two ways:

 

 

 

 

Press Ctrl-c. The login prompt appears. Use the login setup to run the Setup program.

 

 

 

 

Enter n at the final prompt. The Setup program exits, then restarts.

 

 

 

 

Refer to the sample setup session below for an example of the prompts and their responses:

 

 

 

Step 4

Press ESC to log in:

 

 

 

 

USER ID:

 

 

 

 

LILO

 

 

 

 

boot:

 

 

 

 

boot:

 

 

 

 

Loading linux

 

 

 

 

Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96

 

 

 

 

20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001

 

 

 

 

BIOS-provided physical RAM map:

 

 

 

 

BIOS-e820: 000000000009dc00 @ 0000000000000000 (usable)

 

 

 

 

BIOS-e820: 0000000000002400 @ 000000000009dc00 (reserved)

 

 

 

 

BIOS-e820: 0000000000020000 @ 00000000000e0000 (reserved)

 

 

 

 

BIOS-e820: 000000003feec340 @ 0000000000100000 (usable)

 

 

 

 

BIOS-e820: 0000000000010000 @ 000000003fff0000 (reserved)

 

 

 

 

BIOS-e820: 0000000000003cc0 @ 000000003ffec340 (ACPI data)

 

 

 

 

BIOS-e820: 0000000001400000 @ 00000000fec00000 (reserved)

 

 

 

 

127MB HIGHMEM available.

 

 

 

 

On node 0 totalpages: 262124

 

 

 

 

zone(0): 4096 pages.

 

 

 

 

zone DMA has max 32 cached pages.

 

 

 

 

zone(1): 225280 pages.

 

 

 

 

zone Normal has max 1024 cached pages.

 

 

 

Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide

 

 

 

 

2-16

 

 

OL-2706-01

 

 

 

 

 

Page 16
Image 16
321 Studios OL-2706-01 manual Installation Overview