Chapter 2 Provisioning
Step by Step Installation and Initial Configuration
Company Code: cisco
ConfigService AdminID: csadmin
ConfigService password: ******
NSM Directives: default://
Event Gateway Debug Log (y/n): n
# of Event Gateways N for serving 500 x N devices: 1
CNS Event Bus Network Parameter:
CNS Event Bus Service Parameter: 7500
Commit changes (y/n): y
Update administrator info ...
Shutdown servers ...
Configure network ...
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
Configure IMGW ...
Configure DCL ...
Run configurator ...
Configure EvtGateway start/stop file ...
Register tibco rvrd start/stop script for system shutdown/restart ...
Run NSM configurator ...
Start servers ...
/etc/rc.d/init.d/NetAppDCL start
Start tibco
/etc/rc.d/init.d/tibco start
/etc/rc.d/init.d/httpd start
/etc/rc.d/init.d/Imgw start
/etc/rc.d/init.d/EvtGateway start
Initialize DCL for Internal Mode ...
Configure DAT ...
Install IBM Director takes approximately 4 minutes ...
IBM Advanced System Management Device Driver loaded.
cd /opt/IBMDirectorInstall; nohup sh /opt/IBMDirectorInstall/dirinstall
>>
Press <Enter> to login!
Red Hat Linux release 7.1 (Seawolf)
Kernel
Last login: Fri Oct 4 10:12:27 on ttyS0
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
|
| |
|