ipSetup

The ipSetup command allows the user to define an IP address on the device either manually or via a DHCP server.

Syntax

ipSetup

Default Configuration

No default IP address is defined for interfaces.

User Guidelines

When the IP address is configured manually by the user, the address must be in the range 0.0.0.0 through 223.255.255.255.

IP Addresses configured beyond the range of 224.0.0.0 are defined as multicast, experimental or broadcast addresses.

If a default gateway is configured manually, the IP-address and mask are required to be the same as the gateway-address and mask.

CLI Commands

95

Example

The following example displays an IP address configured manually:

Select menu option: ipSetup

Enter configuration method (auto,manual)[auto]: manual

Enter IP Address

[0.0.0.0

]:

192.168.1.1

 

 

Enter

Subnet Mask

[255.255.0.0

]:

255.255.255.0

 

 

Enter

Default Gateway

[192.168.1.254

]:

Select management VLAN ID (1)[1]:

This operation may take up to 30 seconds.

Select menu option:

The following example displays an IP address obtained via a DHCP server:

Select menu option: ipSetup

Enter configuration method (auto,manual)[manual]: auto

Select management VLAN ID (1)[1]:

This operation may take up to 30 seconds.

Select menu option:

Page 95
Image 95
3Com 2426-PWR, 2226-SFP, 2250-SFP manual IpSetup, 255.255.255.0