Initialize
The Initialize command resets the device configuration to factory defaults, retaining the current IP configuration.
Syntax
Initialize
Default Configuration
This command has no default configuration.
User Guidelines
The system prompts for confirmation of the request. If no response is entered within 15 seconds, timeout occurs and the command is not executed.
Example
The following example resets the Switch to factory defaults:
Select menu option: initialize
WARNING: This command initializes the system to factory defaults (excluding Management IP configuration) and causes a reset.
Do you wish to continue (yes,no)[no]: yes
Saving configuration | Saved config to all | |
units. |
|
|
System | rebooting | |
CLI Commands | 97 |
Reboot
The Reboot command simulates a power cycle of the device.
Syntax
reboot
Default Configuration
This command has no default configuration.
User Guidelines
There are no user guidelines for this command.
Example
Select menu option: reboot
Are you sure you want to reset the system (yes,no)[no]: yes
Saving configuration | Saved config to all |
units. |
|
System rebooting |
|
