Upgrading from the Command Line Interface 65
XModem (using the To upgrade software to your Switch using XModem do the following: console cable)
1From the User View, enter:
xmodem get unit1>flash:/3ComOScfg.def
The following information is displayed:
**** WARNING ****
xmodem is a slow transfer protocol limited to the current speed
settings of the auxiliary ports.
During the course of the download no exec input/output will be available!
Proceed?[Y/N]y
Destination filename [unit1>flash:/vrpcfg.def]?
Before pressing ENTER you must choose ‘YES’ or ‘NO’[Y/N]:
2Enter y to display the following message:
Download with XMODEM protocol...
...C..
3As the file is downloading, start the XModem send file process with terminal emulation software, such as Microsoft Hyperterminal.
When the file download is complete the message Download successful! is displayed.
4Repeat step 1 to step 3 for each of the remaining files.
