Setting Use Notes
ProjectorFunctions menu
AutoSignal Detect Enablesor disables signals earchingof
inputconnectors.
Thedefault is off.
SelectOn to have the projector
continuouslyswitch i nputsuntil it finds
anactive video source.
SelectOff to maintain signal detection
inone input.
LampReminder Turnsthe lamp replacementreminder
onor off.
Thisreminderappears 100hours
beforethe recommendedlamp
replacement.
LampMode Adjustsl ampbrightness to Standard
orEconomy.
Standarddisplays a high-quality,
brightimage.
Economyincreases the lamp life by
decreasingthebrightness of the image.
AutoPower Off
(minutes)
Sets thelength of the auto power-off
countdowntimer between1 and 240
minutes.
Thedefault is 120 minutes.
Thetimer begins to count down when
theprojector nolonger receives a video
signal.The timer finishes when the
projectorentersSt andbymode.
Select0to t urnoff thetimer.
Zoom Adjustst hez oomt ot hec enterof the
imagein or out from 0 to 30.
Thedefault is 0.
Zoomingin cuts off the outer edges of
thesource video.
ProjectorID Sets theprojector’s uniqueI D number
(from0 to 99) within your organization’s
network.
Youcan refer to this numberw hen
usingthe network remotemanagement
feature(see Remotely managingyour
system througha network interface on
page59).
CH A P T E R 3
Usingyour interactivew hiteboard system
16