Setting Use Notes
IP Address Displays the projector’scurrent IP
addressin values between0.0.0.0 and
255.255.255.255.
Tochange the projector’sIP address,
usethe RS-232 connector(see
Networkc ontrols onpage 75) oruse a
DHCP server to assign a dynamic IP
address,and thens et a static IP
addressusing thenetwork remote
managementfeature(see Remotely
managingyoursys tem througha
networkinterface on page 59).
SubnetMask Displays the projector’ssubnet mask
numberin values between0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’sdefault
networkgateway in values between
0.0.0.0and 255.255.255.255.
DNS Displays the projector’sprimary
domainnamenumber in values
between0.0.0.0 and255.255.255.255.
MAC Address Displays theprojector’s MAC address
inxx-xx -xx-xx-xx-xx format.
GroupName Displays the projector’s workgroup
nameas set by anadministrator
(maximum12 characters).
Youcan set the projector’s workgroup
nameusing the remotemanagement
features(see Remotely managingyour
system througha network interface on
page59 andRemotely managingy our
system throughan RS-232 serial
interface onpage67).
ProjectorName Displays the projector’sname as set
byan administrator (maximum12
characters).
Youcan set the projector’s name using
theremote managementfeatures (see
Remotelymanagingy oursy stem
througha networkinterface onpage 59
andRemotely managingyour system
throughanR S-232serial interface on
page67).
Location Displays t heprojector’s location as set
byan administrator (maximum16
characters).
Youcan set the projector’s location
usingthe remote managementfeatures
(seeRemotely managingyour syst em
througha networkinterface onpage 59
andRemotely managingyour system
throughanR S-232serial interface on
page67).
CH A P T E R 3
Usingyour interactivew hiteboard system
19