Submenu setting Description
ProjectorMode Adjustst heprojection mode to Front,Ceiling,Rearor Rear Ceiling.
II M P OR T A N T
SMART recommendsthat you never changethis s ettingf romthe
Ceiling projectionmode.
Source Adjustst heinput source to VGA-1,VGA-2,Composite,S-Videoor
HDMI.
USBControl settings
Thismenu allows you to associate a video source with a USB receptacleon the ECP.
Submenu setting Description
USB1Source Enablestouch for the selected video source(VGA-1,VGA-2,HDMI
orDisabled) by associating the video sourcew ith the roomcomputer
USB receptacle(USB1) on the ECP.
USB2Source Enablestouch for the selected video source(VGA-1,VGA-2,HDMI
orDisabled) by associating the video sourcew ith the laptopUS B
receptacle(USB2) on the ECP.
TT I P
Thesesettings are only availablef orSMAR TUX60projectors runningDLP firmware version
1.0.0.4or later.
Networksettings
Thismenu allows you to use or not use Dynamic Host ControlProtocol (DHCP) and to set the
network-relatedaddressesand nameswhen DHC P is not used.
Submenu setting Description
DHCP Determinesif the projector’s IPaddressand other network settings
aredynamically assignedby aDH CPserveror manually set.
lOnallows the network’s D HCP server to assign a dynamic IP
addressto the projector.
lOffallows you to manually set the projector’s IP address and
othernetwork settings.
IP Address Displays orallows you to set the projector’sIP address in values
between0.0.0.0 and255.255.255.255.
SubnetMask Di splays or allows you to set the projector’s subnetmask numberin
valuesbetween 0.0.0.0 and255.255.255.255.
Gateway Displays orallows youto s et the projector’sdefault network gateway
invalues between 0.0.0.0 and255.255.255.255.
AP P E N D I X A
Remotelymanaging your system throug h a networ k interface
63