lAfterthe projector executes a command,it generatesaresponse.
lToprevent buffer overrun,don’t send anothercommanduntil y oureceive the next command
prompt.
Value-based commandm ethods
Absolutevalues and adjustment values
Youcan use the command’s targetrange to set an absolute valuef ora c ommandor cause an
adjustmentto be made to the currentvalue. To create an adjustmentc ommand,add a plus (+) or
minus(-) symbol instead of the equalsy mbol(=) before the value changeyou want to enter.
Allabsolute values you enter must be within the commandtarget range, andall adjustment values
mustequal a numberwit hint hec ommandtarget range.
Seethe following examples for adjustingprojector brightness:
>get brightness
brightness=55
>set brightness=65
brightness=65
>set brightness+5
brightness=70
>set brightness-15
brightness=55
Video sourcespecification values
Youcan use the source input field describedin Source selection controls on page72 in a command to
setan absolute value or adjustmentvalue to a source other thant heactiv e source. Youc ando this
whilethe selected source is inactive, but the source device must be connected ory ouw ill receive an
invalidcommand response.
Seethe following examples, whereboth an HDMI connectoranda VGA 1 input are connected:
>set input=hdmi
input=hdmi
AP P E N D I X B
Remotelymanaging your system throu gh an RS- 232 serial interface
70