3Com ISDN Modem manual Configuring Multilink PPP, Appears Click Finish

Configuring the 3C882 ISDN Modem for a PC 3-9

SPID(s) are configured, clicking on the 3ComImpact IQ globe icon will thereafter display the Configuration dialog box.

If you add a second telephone number to your ISDN line after you run the SPID Wizard, you can use the SPID Wizard to detect the SPID for your second telephone number.

To run the SPID Wizard for a second telephone number:

1From the Configuration dialog box, check the Enabled box located in the Number 2 group box.

A message box appears and asks you to confirm that you want to run SPID Wizard.

2Click OK.

The Second Telephone Number dialog box appears.

3Enter the second telephone number for your ISDN line and then click Next.

Figure 3-8 appears.

4Click Finish.

Configuring Multilink PPP

Multilink PPP is a protocol that provides a method for combining multiple PPP connections. Multilink PPP combines the two ISDN B channels, creating a virtual single digital connection of up to 128 Kbps. Note that the destination you are dialing must also support Multilink PPP, or you will get a single B channel connection instead of the dual-channel link.

By default, Multilink PPP is enabled. To enable or disable Multilink PPP, do the following:

1Click inside the Multilink check box in the PPP area to clear it (disable) or check it (enable).

2Click the Update button to download the change to your 3C882 ISDN modem’s S register.