3Com ISDN Modem manual Layer 1 UP Spid 1 Init if required

Configuring the 3C882 ISDN Modem for a Macintosh Computer 4-11

Figure 4-12 Configuration to ring both ports simultaneously

To change the voice call routing setting:

1Specify which Phone port should handle the calls associated with Telephone Number 1.

2If your ISDN line has two telephone numbers, specify which Phone port should handle the calls associated with Telephone Number 2.

3Click the Update Configuration button to download the change to your 3C882 ISDN modem’s S register.

Verifying the Configuration

Check the status bar located toward the bottom of the Configuration dialog box to verify correct configuration. If the parameters were configured accurately and the 3C882 ISDN modem is ready to send and receive calls, the status bar fields will appear as shown here.

The TEI number(s) are not configured by the user. The TEI number(s) are provided by the telephone company for informational purposes only.

■Layer 1: UP

■SPID 1: Init (if required)