3Com ISDN Modem Configuring Internet Access for a Macintosh Computer, TEI 1: Number from 64 to, ■TEI 1: Number from 64 to, SPID 2: Init (if required)

4-12 CHAPTER 4: CONFIGURATION FOR AN APPLE MACINTOSH COMPUTER

■TEI 1: Number from 64 to 126

■SPID 2: Init (if required)

■TEI 2: Number from 64 to 126 (if required)

Before closing the Configuration dialog box, do the following.

1Confirm that the Configuration dialog box parameters are correct.

2Click the Update Configuration button if you made any changes to the 3C882 ISDN modem configuration.

3Click Quit to exit the Configuration dialog box.

This completes the 3C882 ISDN modem configuration.

Refer to Chapter 5,“Advanced Configuration,” to review the default settings and ensure that they reflect your preferences. If you prefer not to change the default settings, then go on to Chapter 7,“Placing and Receiving Calls.”

Configuring Internet Access for a Macintosh Computer

There are two Internet Access Configuration scenarios covered:

■Open Transport (1.1 or higher) with OT/PPP

■Open Transport (1.1 or higher) with FreePPP

Set Up Using OT/PPP and Open Transport

This section describes setting up the 3C882 ISDN modem for use with Apple’s Open Transport PPP (OT/PPP) in conjunction with Apple’s Open Transport networking software (version

1.1or higher). These instructions assume that the pertinent software has already been installed on your system.