3Com ISDN Modem manual Configuring Internet Access for a Macintosh Computer

Configuring Internet Access for a Macintosh Computer 4-19

7Choose the port to which your 3ComImpact IQ ISDN modem is attached. Under Modem Init String Settings, click Use: and add at&d0. Click OK to return to the FreePPP Setup screen.

NOTE: You may want to set up unique modem configurations for each dial up Account profile (i.e., one Multilink PPP dial up account and one 64K Single link dial up). In this case, you would need to set specific modem init strings for each Account. To do this, check Use init string from account configuration in the Modem Init Strings Settings of the Modem Setup screen shown in Figure 4-19. You would then specify a specific modem init string under the Connection tab of each Account configuration profile that you create.

For example, to set up a specific account profile for Multilink PPP calls, you would add S80=1 to the end of any existing init string you have; your complete init string would then read at&d0S80=1.

Multilink PPP calls may also be designated via the Configuration dialog box.

8Click Open TCP/IP to access the TCP/IP control panel shown in Figure 4-20.