3Com NJ220 manual Securely mount the IntelliJack on a wall

12CHAPTER 1: INSTALLING THE NJ220 INTELLIJACK

Connecting the Local If your network does not support Power Over Ethernet, or if you are not using a Power Supply (Optional) single-port or multi-port Ethernet power supply, you must purchase a local power

supply from 3Com (see “Obtaining Optional Components” on page 4). To connect the local power supply to the IntelliJack, please follow these steps:

1Route the power cable through the strain relief of the IntelliJack (as shown in the diagram below).

2Securely mount the IntelliJack on a wall.

3Plug the power cable into the IntelliJack.

4Secure the local power supply and cable to the wall.