4CHAPTER 1: INSTALLING THE NJ220 INTELLIJACK
Before You Begin | Before you begin installation, register your product at: |
| http://eSupport.3com.com/. |
| The IntelliJack is available in single- and |
| installation, make sure you have the following items, which are included with the |
| IntelliJack: |
| • 1.5 inch, 6x32 screws (2 per IntelliJack) for mounting the IntelliJack to the wall |
| or office cubicle. |
| • Male to male |
| cable from the network to the IntelliJack (required only if your network cable is |
| terminated with a female |
| Additionally, the following items are shipped with the single pack: |
| • Compact disc with User Guide and Configuration Manager software. |
| • Adapter plates for installing connectors to use as |
| adapter plates accommodate connectors from suppliers including: |
n
n
Panduit
Avaya
•Adapter plate screws (2) for mounting the adapter plate to the IntelliJack.
NOTE: The connectors for the adapter plates must be purchased from the manufacturer. For a list of supported connectors, go to the IntelliJack section of www.3com.com/.
Obtaining Optional The IntelliJack works with the following optional components, all of which are
Componentsavailable from 3Com. Order online at www.3com.com or by calling
Component | Purpose | 3C Number(s) |
|
|
|
Adapter plates | For installing | |
| your choice that allow a direct connection to | |
| another network segment or for connecting an | |
|
| |
| analog or digital PBX telephone. Available | |
| adapter plates accommodate connectors for | |
| the following manufacturers: AMP, Avaya, | |
|
| |
| Hubbell, Ortronics, and Panduit. | |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
For providing Power Over Ethernet to locally | 3CNJPSE | |
Ethernet power | power a single IntelliJack. |
|
supply |
|
|
|
|
|
For providing Power Over Ethernet to power | 3CNJPSE24 | |
Ethernet power | up to 24 IntelliJacks. | 3C17205 |
supply |
| |
|
| |
|
|
|