3Com V7000 manual VCX Telephone, Model, Overview, extension

12CHAPTER 1: VCX V7000 BASIC TELEPHONE — MODEL 2101

VCX Telephone	Your VCX 2101 Basic Telephone must be configured to work in an IP
Model 2101	network. This means your phone must be assigned an IP address so it can
Overview	communicate with other VCX phones and devices. Typically, your
	administrator assigns IP parameters, including an IP address, as part of
	the installation process.
	Your administrator must also assign a password for your telephone. This
	password associates your telephone extension (and mailbox) with your
	account. This may allow you to configure another VCX phone in the
	system to duplicate your primary phone (see the note below). This means
	if you are away from your primary phone (for example, in a different
	office), you can program the local phone to use your extension. Any calls
	made to your extension will ring in both locations and you can access
	your mailbox from either phone.
	It is also possible for an administrator to lock an extension to a particular
	phone. If this is the case, you cannot program the phone to use your
	extension.

To program the local phone with your primary phone’s extension:

1Press Feature + 600 + 5 + 6 to log out of local phone.

2Press Feature + 600 + 5 + 4 and enter the number of your primary phone.

3Press Feature + 600 + 5 + 6 and enter the password for your primary phone. This associates your extension with the local phone and logs you in to the network.