68CHAPTER 6: STANDARD FEATURES
To prepare the headset for all calls on the Model 3102 Business
Telephone:
1Plug the headset connector into the headset jack on the underside of the telephone.
2Press the Headset button. By default, this button is the Access button just below the Program button at the top right corner of the telephone.
3Verify that the indicator light next to the Headset button comes on.
To answer a call when you are using the headset:
1Put the headset on. When a call comes in, press the System Appearance button beside the flashing light. You are connected to the call.
The handset can be either on hook or off hook.
2To end a call when you are using the headset, press the Release button on the telephone. By default, the Release button is located at the bottom of the right column of Access buttons.
Returning to the Certain brands of headsets enter a
Long Delay conditions are true:
■The headset amplifier buttons for Mute and On are both set to On.
■The handset is off the phone for a long time (for example, overnight).
It may take a few minutes for your headset to return from the
If you plan to not use the headset for a long time, 3Com recommends that you set the mute and headset buttons on the amplifier to Off and hang up the handset on your telephone. When you are ready to receive calls again, set up the headset for receiving calls:
1Pick up the handset on your telephone and set it on your desk.
2Put on the headset.
3On the amplifier, set the headset button to On.