Chapter10. Administration
Synchronize time with NTP
Here,select if NTP synchronizing should be enabled or not.
Enterservers to sync with in the table below.
DNS name or IP address
Thename/IP address of the NTP server to which the Telecommuting Module should connect.
IP address
Showsthe IP address of the DNS name or IP address you entered in the previous field.
Delete Row
Ifyou select this box, the row is deleted when you click on Add new rows,Save, or Look up all IP addresses
again.
Create
Enterthe number of new rows you want to add to the table, and then click on Create.
Save
Savesall Date and Time configuration to the preliminary configuration.
Cancel
Clearsand resets all fields in new rows and resets changes in old rows.
Look up all IP addresses again
Looksup the IP addresses for all DNS names on this page in the DNS servers you entered on the Basic
Configurationpage.
Restart
Here,you can reboot the Telecommuting Module or restart certain modules.
Whenthe Telecommuting Module is rebooted, all active sessions, including SIP sessions (SIP calls, video
conferencesetc), will be torn down. SIP user registrations are not affected.
Whenthe SIP module is restarted, all active SIP sessions (SIP calls, video conferences etc) will be torn down and
allSIP user registrations will be removed.
N.B!The reboot/restart will be instantaneous when the button is pressed.
96