Chapter6. Basic Configuration
Trapsending
Selectif trap sending (at boot and failed SNMP authentication) should be On or Off.
Trapreceiver
Enterthe IP address, or a name in the DNS, of the server to which the Telecommuting Module should send traps. If
youenter a DNS name instead of an IP address, you must enter the IP address of a DNS server on the Basic
Configurationpage.
IPaddress shows the IP address of the DNS name or IP address you entered in the previous field.
Community
Enterthe password (community) which the Telecommuting Module should use when sending traps. The
communityis sent unencrypted over the network.
Version
Selectthe SNMP version to be used for traps. You can select v1 or v2c.
Delete Row
Ifyou select this box, the row is deleted when you click on Add new rows,Save, or Look up all IP addresses
again.
Create
Enterthe number of new rows you want to add to the table, and then click on Create.
Download the 3Com MIB
Thislink leads to the MIB (Management Information Base) definition for your 3Com VCX IP Telecommuting
Module.
Save
Savesthe SNMP configuration to the preliminary configuration.
Cancel
Revertsall of the above fields to their previous configuration.
53