Chapter 3. Configuring 3Com VCX IP
Telecommuting Module
Youconnect to your 3Com VCX IP Telecommuting Module by entering its name or IP address in the Location box
ofyour web browser.

Logging on

Beforeyou can configure the Telecommuting Module, you must enter your administrator username and password or
RADIUSusername and password. The admin user is predefined with complete administration privileges.

Log on again

Ifyou have a web connection for Telecommuting Module configuration that is inactive for more than 10 minutes,
youmust enter the password again and click on one of the buttons Keep changes below and Abandon changes
below.
Onall pages where changes have been made, the two buttons Keep changes below and Abandon changes below
willbe shown when you log on again. Keep changes below connects you to the Telecommuting Module and stores
thepreliminary configuration you have changed. Abandon changes below connects you to the Telecommuting
Moduleand discards the changes you have made on this page.
Onpages where nothing has been changed, the Log in again button is displayed. Enter the password and click on
thebutton to re-connect to the Telecommuting Module.
TheTelecommuting Module’s encryption key is changed every 24 hours. If you have a web connection for
TelecommutingModule configuration when this happens, you must enter the password again. This works in the
sameway as when your connection has been inactive for more than 10 minutes (see above).

Log out

Whenyou have finished looking at or adding settings, you should log out from the Telecommuting Module. Below
themenu there is a Log out button which will end your session.
13