Chapter4. How To Configure SIP
Basic Configuration
Ifno other SIP routing information is entered, the Telecommuting Module must be able to look up SIP domains in
DNS.DNS servers are entered on the Basic Configuration page under Basic Configuration.
Save/Load Configuration
Finally,go to the Save/Load Configuration page under Administration and apply the new settings by pressing
Applyconfiguration.
Client Settings
SIPclients will use the Telecommuting Module as their outgoing SIP proxy and the SIP domain as the registrar.
Standalone Telecommuting Module, SIP server inside
Youmight instead have a SIP server of your own, located on the inside or maybe on a DMZ.
Ifthe SIP server is located on a NATed network, DNS queries for the SIP domain should point to the
TelecommutingModule, which in turn will forward the SIP traffic to the server.
Notethat the Telecommuting Module must have a public (non-NATed)IP address for the SIP signaling to work
correctly.
28