Chapter10. Administration
Saveconfiguration saves your preliminary configuration to the permanent configuration and puts it into use.
Continuetesting shows a new page with only the other two buttons.
Revertcancels this test of the preliminary configuration without saving.
Ifyou do not press any button within the time limit, the Telecommuting Module will revert to the old permanent
configuration,just as if you had pressed Revert. This is useful if you happen to configure your Telecommuting
Moduleso it isn’t accessible from your browser.
Afterthe timeout, pressing either of the three buttons will show a new page which will inform you that the test run
wasaborted.
Restartingthe Telecommuting Module by cycling the power also cancels the test.
Backup
Allconfigurations can be saved to and loaded from diskette or file. This does not affect the permanent configuration.

Save to diskette

Inserta formatted diskette into the Telecommuting Module’s floppy drive and press Save to diskette to savethe
preliminaryconfiguration. Do not remove the diskette until the light on the floppy drive goes out.
Checkthat you get a confirmation of the saving. If not, the diskette may be faulty.

Load from diskette

Insertthe diskette with the saved configuration into the Telecommuting Module’s floppy drive and press Load from
diskette.Do not remove the diskette until the light on the floppy drive goes out. The contents of the diskette are
nowloaded in the preliminary configuration.

Save to local file

PressSave to local file to save the preliminary configuration to the file you have selected. A new window is opened
whereyou enter the name of the file.

Load from local file

PressLoad from local file to load a new preliminary configuration from the file you have selected.

Browse

Browseis used to scan your local disk. The web browser opens a new window where you can search among files
anddirectories. Go to the right directory and select the file you want to upload.
Revert to old configurations
Youcan revert to old configurations of the Telecommuting Module, either back to the last configuration
successfullyapplied, or to the configuration delivered with your Telecommuting Module from the factory.
88