Chapter10. Administration
Account Type
Selectwhat privileges this user should have.
FullAccess means that the user can make any changes to the configuration. This is the same privileges as the admin
userhas in the web GUI, but only the admin user can log on via the serial cable.
Backup/RestoreConfig means that the user can download the configuration to file, and upload a configuration file
tothe Telecommuting Module. The user is also allowed to apply configurations.
TheVPN admin account is not used in a base Telecommuting Module.
TheVPN renegotiator account is not used in a base Telecommuting Module.
SIPadmin means that the user can make any changes on the SIP Services and SIP Traffic pages and apply
configurations,but can’t change any other configuration.
ViewConfig Only means that the user can view any configuration and make log searches, but can’t change any
configuration.
Offmeans that the user is not allowed to log on to the web interface of the Telecommuting Module.
Currently Logged In Administrators
Here,all users logged on the Telecommuting Module web interface are shown. If your user has full access, you can
logout other users here.
Account
Thename of the logged on user.
Type
Here,the account type for the user is shown. The account type tells you the user’s access rights for the
TelecommutingModule web interface.
From
Hereyou see from which IP address the user connected to the Telecommuting Module.
Logged in
Hereyou see when the user logged on to the Telecommuting Module.
Last access
Hereyou see when the user last accessed the Telecommuting Module web interface. Accesses could be a change of
aparameter, a change of web page or a log search.
Status
Hereyou see if the user is active or idle. The Telecommuting Module marks a user as idle if the user has not
accessedthe web interface in ten minutes.
91