Chapter 7. Network Configuration
UnderNetwork, you configure:
•Networkgroups which are used for the Telecommuting Module configuration
•TheTelecommuting Module’s IP addresses on all network interfaces
•Routingsfor the networks so that computers behind routers can be contacted
•VLANsettings
•TheTelecommuting Module network environment (only for the DMZ type)

Networks and Computers

Here,you name groups of computers and networks. Sometimes it can be useful to give a group of computers a
networkname, such as Administration. If you want to group some computers, this can be done here, even if they do
nothave consecutive IP addresses. You can also include a subgroup when defining a new network group.
Thenames are used when you configure Surroundings and SNMP.
Everygroup of computers which can reach each other without having to pass through the firewall needs a separate
networkgroup.
Therows are sorted in alphabetical order, except that all upper case letters are sorted before lower case letters (B
comesbefore a).
Whenusing an already defined group as a subgroup, select the name of the group under Subgroup. Set
Interface/VLANto ’-’ and leave the other fields empty.

Name

Entera name for the group of computers. You can use this name when you change configuration on the pages
mentionedabove. A group can consist of several rows of IP addresses or series of IP addresses. By clicking on the
plussign beside the name, you add more rows where you can specify more IP addresses for this group.
60