Chapter7. Network Configuration

Routed network

Enterthe DNS name or IP address of the routed network under DNS name or network address.
TheIP address of the routed network is shown under Network address.
Inthe Netmask field, enter the netmask of the network.

Router

Thename or IP address of the router that will be used for routing to the network. If there are several routers
betweenthe Telecommuting Module and the network, fill in the router closest to the Telecommuting Module.
Delete Row
Ifyou select this box, the row is deleted when you click on Add new rows,Save, or Look up all IP addresses
again.
Create
Enterthe number of new rows you want to add to the table, and then click on Create.
Save
Savesall Interface configuration to the preliminary configuration.
Cancel
Clearsand resets all fields in new rows and resets changes in old rows.
Look up all IP addresses again
Looksup the IP addresses for all DNS names on this page in the DNS servers you entered on the Basic
Configurationpage.
VLAN
VLANsare used for clustering IP ranges into logical networks.
AVLAN id is simply a number, which identifies the VLAN uniquely within your network.
Here,you can list the VLANs you wish to use and give them names, to make administration easier.
NamedVLANs can also be selected instead of interfaces on the Networks and Computers page.
65