Chapter10. Administration
TheTime zone field shows the current time zone setting. Change time zone by selecting one in the left-hand box
andpress the Change time zone button.
Change Date and Time Manually
Hereyou change the Telecommuting Module clock manually. When you change time here, there will be a time gap
inthe log files (if you change time forwards) or the same time will be shown twice (if you change time backwards).
N.B.Before you change time here, make sure that the Telecommuting Module uses the correct time zone above.

Date

Thedate is written as four digits for the year, two for the month and two for the day. The punctuation between year,
monthand day must be dashes (-).

Time

Timeis written as two digits for the hour, two digits for the minute and two digits for the second, although seconds
canbe left out. The punctuation between hours, minutes and seconds must be colon (:) or period (.). A 24-hour
clockis used.

Set date and time manually

Clickon Set date and time manually to change the clock in the Telecommuting Module to what you entered in the
Dateand Time fields.
Change Date and Time With NTP
Insteadof setting the time manually, you can let the Telecommuting Module get the correct time from an NTP
server.The time for synchronizing will be notably shorter if the Telecommuting Module time is approximately
correctwhen NTP is activated.
N.B.Before you change time here, make sure that the Telecommuting Module uses the correct time zone above.
95