Chapter11. Logging
Name
Here,you give the log class a Name.
Log locally?
Selectto save log messages to a local file on the Telecommuting Module. Locally saved logs can be searched on the
DisplayLog page. Yes will cause the log messages using this log class to be saved to file. No will cause the log
messagesnot to be saved on the Telecommuting Module and thus also not possible to search under Display Log.
Syslog
Syslogsends log messages to a syslog server. You enter the IP address of the syslog server on the Log Sending
page.Select Facility and Level for the syslog message. See your syslog server manual for more information on
facilityand level. Selecting None for both Facility and Level turns the syslog alternative off. None must be selected
forboth or none of Facility and Level. The Telecommuting Module will display a red warning text until both or
noneof them are None.
Email address
TheTelecommuting Module may also send the log messages by email to one or more email addresses. Enter the
addresseshere (separated by comma). You must specify a mail server on the Log Sending page for the
TelecommutingModule to send the emails properly.
Delete Row
Ifyou select this box, the row is deleted when you click on Add new rows or Save.
Create
Enterthe number of new rows you want to add to the table, and then click on Create.
Save
Savesthe Log Classes configuration to the preliminary configuration.
Cancel
Clearsand resets all fields in new rows and resets changes in old rows.
Log Sending
In3Com VCX IP Telecommuting Module, there are two ways of sending log messages automatically to somewhere
outsidethe box; to send to a syslog server and to send an email to an email address. If either method is used, the
TelecommutingModule must know where to send this. On this page, servers for log sending are configured.
110