MANUFACTURER’S Declaration of Conformity | 3Com WL-560 instruction

MANUFACTURER’S DECLARATION OF CONFORMITY

3Com Corporation

350 Campus Drive

Marlborough, MA 01752-3064, USA

(800)527-8677 Date: June 30, 2004

Declares that the Product:

Brand Name: 3Com Corporation

Model Number: WL-560

Equipment Type: 11a/b/g Wireless Workgroup Bridge

Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Image 66

3Com WL-560 manual MANUFACTURER’S Declaration of Conformity

Contents

3Com 11a/b/g Wireless Workgroup Bridge User Guide 3Com Corporation Campus Drive Marlborough MA USA Contents Configuring the Bridge END User License Agreement Regulatory Information Page About this Guide Documentation ConventionsRelated Following Documentation documentation Product Registration Support Introduction 802.11a 802.11g Network ConfigurationNetwork Configuration and Planning Planning Example ConfigurationsWireless Infrastructure Network Workgroup Ad-Hoc Network Unpacking Bridge Bridge Deciding Where to Place the Bridge Wall-Mounting the Bridge Routing Cable Under the Cradle Securing the Locking Bar Connecting Connecting the Power About the Client List Connecting to a Hub Connecting the Bridge Network printers in areas that are not wired for Ethernet Indicators LED External Antenna Need to ConfigureAttaching An Determining if you Determining if you Need to Configure the Bridge Networks without a Dhcp Server Bridge Default Settings To Wireless Client Infrastructure Using the 3Com Installation CD Using the 3Com Installation CD Installing the Bridge Configuring the Bridge Infrastructure Using the 3ComWireless Device Manager Click Configure Using the 3Com Wireless Infrastructure Device Manager Button Description Using ManagementSystem Clearing Applying System Configuration Settings Moving to a new configuration System Properties Server, select Obtain an IP address automatically and click Apply Select Wireless Client Infrastructure to associate with an Select 802.11a to set the Bridge to operate with either Service Area Select Specify the Wireless LAN Service Area to allow External and one internal antenna this setting Being used, click Long Wi-Fi Interoperable Set the Data Preamble No Security Open System 40/64-bit Shared Key WEP 104/128-bit Shared Key 128/152-bit Shared Key Or Disable AES Secondary Radius Using the Configuration Management System Configuring Operation Mode About Uart Configuring Uart Settings Configuring Network Serial Port Settings Applying Settings Reset Under Tools, click Restore Factory Defaults Or with the Bridge out of the cradle Using FTP default Using Tftp Using Http Under Tools, click Backup Wireless Workgroup Bridge Under Tools, click Restore Wireless Workgroup Bridge Summary Page Problems Diagnosing Troubleshooting Uninstall 3Com Wireless Infrastructure Device Manager DisconnectingUninstalling Disconnecting the Bridge Upgrading Bridge Firmware Register Your Service BenefitsSolve Problems Product to Gain Access Software WarrantyProfessional Services Purchase Extended Directory of 3Com resources by region at Contact Us Latin America Telephone Technical Support and Repair END User License Agreement Page Regulatory Information MANUFACTURER’S Declaration of Conformity Industry Canada IC Emissions Compliance Statement Europe EU Declaration of Conformity Bipt Indoor/Outdoor