38CHAPTER 3: CONFIGURING THE BRIDGE
Table 12 RADIUS Authentication Server Settings (continued)
Secondary RADIUS | Enter the IP address of the secondary RADIUS Authentication |
Server | Server. Make sure this address matches the address set in the |
| RADIUS Authentication software. |
Secondary RADIUS | Enter the port number of the secondary RADIUS |
Port | Authentication Server. Make sure this number matches the |
| number set in the RADIUS Authentication software. The |
| default port is 1812. |
Secondary RADIUS | Enter the password of the secondary RADIUS Authentication |
Secret | Server. Make sure this password matches the password set in |
| the RADIUS Authentication software. |
|
|
Changing SNMP Under System Configuration, click SNMP to display and change settings Settings for the Simple Network Management Protocol.
To communicate with the Bridge, the SNMP agent must first be enabled and the Network Management Station must submit a valid community string for authentication. Select SNMP Enable and enter data into the fields as described below. When you are finished, click Apply.
Table 13 SNMP Settings
Setting | Description |
|
|
SNMP | Enables or disables SNMP. |
Contact | Sets the location string that describes the system location. |
| Maximum length: 255 characters. |
Community Name | Specifies a community string with |
(Read Only) | Authorized management stations are able to retrieve MIB |
| objects. Maximum length: 23 characters. |
Community Name | Specifies a community string with |
(Read/Write) | Authorized management stations are able to both retrieve |
| and modify MIB objects. Maximum length: 23 characters. |
Trap Destination | Enter the IP address of the trap manager that will receive |
IP Address | these messages. |
Trap Destination | Enter the community name of the trap manager that will |
Community Name | receive these messages. |
|
|
