26CHAPTER 3: CONFIGURING THE BRIDGE
Figure 15 Wireless Infrastructure Device Manager Pre-IP Configuration
4The next window prompts for an administrative password to allow the new IP address to be set. If this is the first time the device is being configured, leave the password field blank and click Next.
The configuration main page appears in your Web browser. See “Using the Configuration Management System” on page 27 for details.
Table 7 describes the functions of the buttons in the 3Com Wireless Infrastructure Device Manager window.
Table 7 Infrastructure Device Manager Options
Button | Description |
Properties | Displays the following properties of the selected device: |
| Device Name, Device Type, Wireless LAN Service Area (ESSID), |
| IP Address, Subnet Mask, and MAC Address. |
Configure | Launches the Configuration Management System for the |
| selected device. If the selected device is on a different subnet, |
| you are prompted to assign an address on the same subnet as |
| your computer. |
Refresh | Scans the network and displays the connected 3Com 11a/b/g |
| Wireless LAN devices. |
Choose NIC | If your computer has more than one network interface card |
| installed, allows you to choose which card to use. |
Close | Closes the device manager window and ends the session. |
Help | Launches the device manager help page in your browser. |
|
|
