Using FTP default, Using Tftp | 3Com WL-560 manual

44CHAPTER 3: CONFIGURING THE BRIDGE

Upgrading the You can download firmware updates or updates of the Configuration System Management System from the 3Com Web site and install those updates

on the Bridge.

Options for upgrading the system include using a Trivial File Transfer Protocol (TFTP) server or File Transfer Protocol (FTP) server. The Bridge acts as a TFTP or FTP client to receive the download. Alternatively, you an use the HTTP option and upload the firmware from a downloaded file placed on your computer.

Using FTP (default)

The general instructions for installing the upgrade using FTP are:

1Launch the Configuration Management System.

2Under Tools, click Upgrade System.

3Select FTP.

4Enter the IP address of the FTP server where the upgrade files are located.

5Enter the user name, password, path and filename in the appropriate fields.

6Click Upgrade.

Using TFTP

The general instructions for installing the upgrade using TFTP are:

1Launch the Configuration Management System.

2Under Tools, click Upgrade System.

3Select TFTP.

4Enter the file name for the firmware.

5Enter the IP address of the TFTP server where the upgrade files are located.

6Click Upgrade.

Image 50

3Com WL-560 manual Using FTP default, Using Tftp

Contents

3Com 11a/b/g Wireless Workgroup Bridge User Guide 3Com Corporation Campus Drive Marlborough MA USA Contents Configuring the Bridge END User License Agreement Regulatory Information Page About this Guide Documentation ConventionsRelated Following Documentation documentation Product Registration Support Introduction 802.11a 802.11g Network ConfigurationNetwork Configuration and Planning Planning Example ConfigurationsWireless Infrastructure Network Workgroup Ad-Hoc Network Unpacking Bridge Bridge Deciding Where to Place the Bridge Wall-Mounting the Bridge Routing Cable Under the Cradle Securing the Locking Bar Connecting Connecting the Power About the Client List Connecting to a Hub Connecting the Bridge Network printers in areas that are not wired for Ethernet Indicators LED External Antenna Need to ConfigureAttaching An Determining if you Determining if you Need to Configure the Bridge Networks without a Dhcp Server Bridge Default Settings To Wireless Client Infrastructure Using the 3Com Installation CD Using the 3Com Installation CD Installing the Bridge Configuring the Bridge Infrastructure Using the 3ComWireless Device Manager Click Configure Using the 3Com Wireless Infrastructure Device Manager Button Description System UsingManagement Clearing Applying System Configuration Settings Moving to a new configuration System Properties Server, select Obtain an IP address automatically and click Apply Select Wireless Client Infrastructure to associate with an Select 802.11a to set the Bridge to operate with either Service Area Select Specify the Wireless LAN Service Area to allow External and one internal antenna this setting Being used, click Long Wi-Fi Interoperable Set the Data Preamble No Security Open System 40/64-bit Shared Key WEP 104/128-bit Shared Key 128/152-bit Shared Key Or Disable AES Secondary Radius Using the Configuration Management System Configuring Operation Mode About Uart Configuring Uart Settings Configuring Network Serial Port Settings Applying Settings Reset Under Tools, click Restore Factory Defaults Or with the Bridge out of the cradle Using FTP default Using Tftp Using Http Under Tools, click Backup Wireless Workgroup Bridge Under Tools, click Restore Wireless Workgroup Bridge Summary Page Problems Diagnosing Troubleshooting Uninstall 3Com Wireless Infrastructure Device Manager DisconnectingUninstalling Disconnecting the Bridge Upgrading Bridge Firmware Register Your Service BenefitsSolve Problems Product to Gain Access Software WarrantyProfessional Services Purchase Extended Directory of 3Com resources by region at Contact Us Latin America Telephone Technical Support and Repair END User License Agreement Page Regulatory Information MANUFACTURER’S Declaration of Conformity Industry Canada IC Emissions Compliance Statement Europe EU Declaration of Conformity Bipt Indoor/Outdoor