8e6 Technologies ERH-200 (5K02-24), ER3-100 (5K02-55) quick start Link the Workstation to the ER

Link the Workstation to the ER

The procedures outlined in this sub-section require the use of the CAT-5E crossover cable.

A.Plug one end of the CAT-5E crossover cable into the ER’s LAN 1 port.

B.Plug the other end of the CAT-5E crossover cable into the setup workstation’s net- work card.

NOTE: If a CAT-5E coupler was packaged with your unit, this coupler can be used if the crossover cable is not long enough for your setup. Plug one end of the CAT-5E crossover cable into the ER, and the other end into the coupler. Plug a standard CAT-5E cable into the other end of the coupler, and the free end of the standard CAT-5E cable into the setup workstation.

Back of the non-ER “H” server

Back of the ER “H” server

C. Plug the ER into a power source with an appropriate rating.

WARNING: It is strongly suggested you use an uninterruptible power supply.

30 8e6 Enterprise Reporter Quick Start Guide