8e6 Technologies ER3-200 (5K02-56), ER3-100 (5K02-55) quick start Change User Name and Password

If you can access the main screen of the Administrator console, the ER setup is going as planned and you should proceed to changing your User Name and Password. If you cannot access the main screen, verify the following:

•The ER is powered on.

•Can the administrator workstation normally connect to the Internet?

•Is the administrator workstation able to ping the ER?

•Did you restart the ER after changing the network settings?

•If still unsuccessful, contact an 8e6 Technologies solutions engineer or technical sup- port representative.

Change User Name and Password

A.Set up a new administrator user name and password by clicking on the Network pull- down menu and choosing Administrators to display the Add/Edit/Delete Administra- tors screen:

B.Select New Administrators from the pull-down menu.

C.Enter a User Name and Password.

D.In the Confirm Password field, re-enter the password.

E.Click Save.

8e6 Enterprise Reporter Quick Start Guide 39